@Article{, title={The Effect of Sieve Holes and the Type of Grain in Some Performance Indicators the Hammer Mill تأثير فتحات الغربال ونوع الحبوب في بعض مؤشرات أداء المجرشة المطرقية}, author={Basim Aboud Abbas باسم عبود عباس}, journal={Diyala Agricultural Sciences Journal مجلة ديالى للعلوم الزراعية}, volume={4}, number={1}, pages={181-188}, year={2012}, abstract={The experiment was conducted to evaluate the effect of sieves holes and type of grains on some performance indicators of hammer mill in College of Agriculture, University of Diyala, during May and June 2011. The sieves holes for grinder with two levels of diameter were used included 1.5 and 3.5 mm with grinding three types of important grain in the manufacture of feed included wheat, barley and maize. The technical indicators which studied were: Specific Capacity Kg/Kw.h and the specific energy Kw.h/Kg, were also examined some of the qualities of the volumetric of the grinding grains Average particle size mm and standard deviation and Milling evaluation Factor. The experiment carried out using the completely randomized design (CRD), with three replications. Resulted in an increase of sieve holes change the diameter from 1.5 to 3.5 mm resulted a significant increase in Specific Capacity and Average particle size and standard deviation either the specific energy and Milling evaluation Factor recorded lower significant. Led change the type of grain to excellence wheat and maize got significantly higher specific capacity and less specific energy either the barley got significantly highest of the milling evaluation factor and less a average particle size and standard deviation, given the combination factors of the study the highest Specific Capacity and lower specific energy with holes sieve 3.5 mm and wheat and maize either excellence the holes 1.5 mm sieve and barley against giving them the highest the Milling evaluation Factor and less an Average particle size and standard deviation.

أجريت تجربة لدراسة تأثير فتحات الغربال ونوع الحبوب في بعض مؤشرات أداء المجرشة المطرقية في مختبرات كلية الزراعة / جامعة ديالى خلال شهري أيار وحزيران 2011 . تضمن البحث دراسة عاملين هما فتحات غربال المجرشة وبمستويين للقطر هما 1.5 و 3.5 ملم و جرش ثلاثة أنواع من الحبوب المهمة في تصنيع العلف و هي الحنطة و الشعير و الذرة الصفراء. وكانت المؤشرات الفنية المدروسة هي الإنتاجية النوعية كغم/كيلوواط.ساعة والطاقة النوعية كيلوواط.ساعة/كغم ، وتم أيضا دراسة بعض الصفات الحجمية للحبوب المجروشة وهي معدل قياس الدقائق ملم والانحراف القياسي (التجانس) ودرجة تقييم الجرش. نظمت معاملات التجربة وفق التصميم العشوائي الكامل (CRD) وبثلاث مكررات. أدى تغيير فتحات الغربال بزيادة القطر من 1.5 الى 3.5 ملم الى زيادة معنوية في الإنتاجية النوعية و معدل قياس الدقائق والانحراف القياسي فيما انخفضت معنويا الطاقة النوعية ودرجة تقييم الجرش. أدى تغيير نوع الحبوب الى تفوق الحنطة والذرة الصفراء معنويا من حيث أعلى إنتاجية نوعية واقل طاقة نوعية فيما تفوق الشعير معنويا بأعلى تقييم لدرجة الجرش واقل قياس لمعدل الدقائق واقل انحراف قياسي، أعطت توليفة عاملي الدراسة فتحات الغربال 3.5 ملم والحنطة والذرة الصفراء معا أعلى إنتاجية نوعية واقل طاقة نوعية فيما تفوقت فتحات الغربال 1.5 ملم والشعير باعطائهما أعلى تقييم لدرجة الجرش واقل قياس لمعدل الدقائق واقل انحراف قياسي .} }