TY - JOUR ID - TI - Active Inhibitor as Corrosion Protective of Carbon Steel مثبط فعّال لحماية الفولاذ الكربوني من التآكل AU - Ali Hubi Haleem PY - 2008 VL - 6 IS - 1 SP - 196 EP - 207 JO - journal of kerbala university مجلة جامعة كربلاء SN - 18130410 AB - The present study is attempted to find new inhibitors that can to easily be prepared and applied, as well as nontoxic, cheap and available. In this study hibiscus leaves extractor was used to protect carbon steel in hydrochloric acid solution (1M, 2M, and 3M).Since the usable inhibitor is considered organic inhibitor, and for evaluating the inhibition performance of this compound, many tests have been conducted which include measuring the corrosion rate through methods known weight loss and microscopic examination test. In losing weight method the inhibitor gives good efficiency in protecting, the carbon steel to be corroded at 1M HCl is 77% while the efficiency is drop to 68% in 3 M HCl at 30 oC. Microscopic examination test shows the clearness of the metals surface which is under the corrosion medium and which contains inhibitor, from any kind of corrosion that can be found on those surface, which are under mediums completely empty from inhibitor, and also shows the clearness of that protect layer on the surface. The data of corrosion rate show that the way of doing this organic inhibitor is adsorbing and the inhibitor molecules are adsorbed on the metal surface according to Langmuir adsorption isotherm.

البحث الحالي يمثل محاولة لإيجاد مثبطات جديدة سهلة التحضير والتطبيق, غير سامة, رخيصة الثمن ومتوفرة بكثرة, ففي هذا البحث تم استخدام مستخلص نبات الخبازhibiscus leaves) ) في حماية الفولاذ الكربوني في محلول ( 1M, 2M, 3M) حامض الهيدركلوريك. المثبط المستخدم يعد من المثبطات العضوية Organic Inhibitors) ) ولغرض تقييم الأداء التثبيطي لهذه المركبات فقد أجريت عدة اختبارات تضمنت قياس معدل التآكل بطريقة فقدان الوزن واختبار الفحص المجهري . في طريقة فقدان الوزن أعطى المثبط كفاءة جيدة في حماية الفولاذ الكربوني من التآكل إذ بلغت كفاءة المثبط حوالي 77% في محلول حامض الهيدروكلوريك بتركيز 1M في حين انخفضت كفاءة المثبط إلى 68% في محلول حامض الهيدروكلوريك بتركيز 3M بدرجة حرارة oC .30 اظهر اختبار الفحص المجهري خلو سطح الفولاذ الكربوني المتعرض لمحلول حامض الهيدروكلوريك الحاوي على المثبط من مظاهر التآكل المتواجدة على سطح النماذج للوسط التاكلي الخالي من المثبط ووضوح طبقة الحماية الممتزه على السطح. بيانات معدلات التآكل بينت إن آلية عمل المثبط العضوي هي الامتزازAdsorbing)) وان جزيئات المثبط تمتز على سطح المعدن طبقا إلى علاقة لانكمير للأمتزازLangmuir Adsorption Isotherm) ) ER -