@Article{, title={Improving the thermal insulation property of polyester resin تحسين العزل الحراري للبولي استر بإضافة الألياف الزجاجية}, author={Safaa A. S. Almtori , Abdul khaliq A. Hasan and Maitham Y. Atshan}, journal={Journal of Basrah Researches (Sciences) مجلة ابحاث البصرة ( العلميات)}, volume={36}, number={2A}, pages={10-15}, year={2010}, abstract={The aim of this research is to study the effect of fiber glass on the thermal insulation property of polyester resin . Different amounts of fiber glass were added to the polyester resin with hardener then cast as sheet of composite material of dimension (20*20*0.3) cm3 with different fiber glass weight percentage : ( 0% , 4 % , 8 % , 12 % , 16 % , 20 % ) of the total weight. The thermal conductivity was calculated by using Lee’s Disk method . The mean value of five measurements of thermal conductivity ( k ) for each specimen was measured , also the hardness of the specimens was measured by using shore method type D and then sketch the relation between thermal conductivity and hardness with the percentage of fiber glass. The results showed that the thermal conductivity (k) of polyester decreased (which mean thermal insulation increased ) with an increase of fiber glass percentage , and the hardness increased with the increase of fiber glass percentage due to the restricted movement of the chain end of polymer .

يهدف هذا البحث إلى دراسة تأثير إضافة الألياف الزجاجية إلى البولي استر على خاصية العزل الحراري ، وكذلك على الصلادة .حيث تم إضافة كميات مختلفة من الألياف الزجاجية مع البولي استر المخلوط بمادة مصلبة لتكوين شرائح من المادة المركبة ذات أبعاد ( 20 * 20 * 0.3 ) سم3 . تم تحضير ست عينات يختلف فيها نسبة وزن الألياف الزجاجية المضافة وهي ( 0 % ، 4 % ، 8 % ، 12 % ، 16 % ، 20 % ) على التوالي من الوزن الكلي لكل عينة مستخدمة. تم حساب التوصيل الحراري باستخدام طريقة Lee’s Disk ، وذلك باستخدام قيم مختلفة للتيار الكهربائي وحساب معدل التوصيل الحراري ( k ) لكل عينة . كذلك تم قياس صلادة العينات باستخدام طريقة شور للصلادة نوع D . من رسم العلاقة بين كل من التوصيل الحراري ( k ) والصلادة مع النسب المئوية المختلفة لمادة الألياف الزجاجية المستخدمة لوحظ الآتي : انخفاض مقدار التوصيل الحراري k ( أي زيادة العزل الحراري ) وزيادة الصلادة ، كلما زادت نسبة الألياف الزجاجية المستخدمة .} }