@Article{, title={Plane Flow Analysis for a Profile Extrusion Die Using Digital Image processing Technique تحليل الأنسياب المستوي في قالب بثق بأستخدام تقنية المعالجة الصورية الرقمية}, author={Salah K. Jawad and Ali Abbar Khleif and Mohanad Q. Abbood}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={30}, number={9}, pages={1562-1581}, year={2012}, abstract={This paper investigates the applicability of the proposed digital imagecorrelation (DIC) system instead of traditional method by microscope tomeasure the strains in forward extrusion process, which conducted forrectangular section with plane strain condition by using taper die at angle(2 = 90 ̊) and the proportion of reduction in area is (42.85 %).Commercial pure lead (99.99% Pb) was chosen as a typical pattern tomeasure the strain and strain rate for the forward extrusion process by avisio-plasticity technique and the proposed digital image correlationsystem. The obtained results indicate that the proposed digital imagecorrelation (DIC) system is an accurate and reliable for measuring thestrains using inexpensive equipments

يتناول هذا البحث قابلية تطبيق نظام مطابقة الصور الرقمية المقترح بدلاً من الطريقةالتقليدية بأستخدام المجهر لقياس الأنفعال خلال عملية البثق الأمامي، حيث تم إجراء العملية(2 = لمقاطع مربعة تحت ظروف الأنفعال المستوي بأستخدام قالب مخروطي بزاوية ( 90(% وبنسبة تخصر للمساحة مقدارها ( ٤٢.٨٥ %). تم أختيار الرصاص النقي التجاري ( ٩٩.٩٩كنموذج لأجراء عملية البثق الأمامي ومن ثم قياس الأنفعال ومعدل الأنفعال بأستخدام كل منتقنية اللدونة المرئية ونظام مطابقة الصور الرقمية المقترح في هذا البحث. لقد بينت النتائجالمستحصلة دقة ومعولية النظام المقترح لمطابقة الصور الرقمية في قياس الأنفعال بأستخداممعدات غير مكلفة.} }