TY - JOUR ID - TI - Removal of 4-Chlorophenoles from Simulated Wastewater by Advanced Oxidation Processes AU - Yasmen Abdul Mustafa AU - Ahmed Hameed Shihab PY - 2012 VL - 18 IS - 10 SP - 1115 EP - 1127 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - The degradation and mineralization of 4-chlorophenol (4-CP) by advanced oxidation processes (AOPs) was investigated in this work, using both of UV/H2O2 and photo-Fenton UV/H2O2/Fe+3 systems. The reaction was influenced by the input concentration of H2O2, the amount of the iron catalyst, the type of iron salt, the pH and the concentration of 4-CP.A colored solution of benzoquinon can be observed through the first 5 minutes of irradiation time for UV/H2O2 system when low concentration (0.01mol/L) of H2O2 was used. The colored solution of benzoquinon could also be observed through the first 5 minutes for the UV/H2O2/Fe+3 system at high concentration (100ppm) of 4-CP. The results have shown that adding Fe+3 to the UV/H2O2 system enhanced the rate of 4-CP oxidation at a molar ratio of H2O2/Fe+3/4-CP equals to 13/0.4/1 by a factor of 7. This reduced the consumption of H2O2 by a factor of 6 and the irradiation time required for complete degradation was reduced by a factor of 6. The experimental results have shown that the optimum reagents for a complete degradation of 4-CP(50ppm) were H2O2.=0.005mol/L, Fe+3=0.16*10-3 mol/L under acidic condition (pH=3) and irradiation time of 15 min for the UV/H2O2/Fe+3 system with a molar ratio of H2O2/Fe+3/4-CP equals to 13/0.4/1.

تم التحقق من فاعلية استخدام طرق الأكسدة الحديثة ((AOPs للنظامين UV/H2O2 وUV/H2O2/Fe+3 لأكسدة وتحلل مادة الكلوروفينول ((4-CP . التفاعل تأثر باختلاف الكميات المضافة من بيرو كسيد الهيدروجينH2O2)), كميـــــة الحديد كعامل مساعد ,نوعية العامل المساعد Fe+3 وFe+2 , pH و تراكيز المحلول للكلوروفينول . المواد الملونة متمثلة بال ( benzoquinone ( تم ملاحظتها بعد 5دقائق من بدأ التجربة لنظام UV/H2O2عند استعمال تركيز قليل لبيروكسيد الهيدروجين (mol/L 0.01(. كذلك تم ملاحظة ظهور المواد الملونة بعد 5 دقائق من بدأ التجربة لنظام UV/H2O2/Fe+3 عند استعمال تراكيز عالية من الكلوروفينول (100ppm). النتائج بينت ان إضافة الحديد (Fe+3) كعامل مساعد الى لنظام UV/H2O2 وبنسبة مولارية 13/0.4/1 ل H2O2/Fe+3/4-CP أعطت تحلل أعلى بمقدار 7 مرات وأدت إلى تقليل مادة إل H2O2 المضافة بمقدار 6 مرات وان الزمن اللازم للوصول الى التحلل الكامل انخفض بمقدار6 مرات.التراكيز المثلى اللازمة للحصول على تـــحلل كامل للكلوروفينول بتركيز50 ppm هي Fe+3=0.16*10-3mol/L , H2O2=0.005mol/L عند وســط حامضـي pH = 3 وبزمن 15دقيــقة للنــظام UV /H2O2 /Fe+3 وبنسبة مولارية 13 /0.4 /1. ER -