@Article{, title={Surface Area Determination of Activated Carbons Produced from Waste Tires Using Adsorption from Solution تعيين المساحة السطحية للكاربون المنشط المنتج من نفايات الإطارات عن طريق امتزازه من المحلول}, author={Alaa H. Jalil}, journal={Tikrit Journal of Pure Science مجلة تكريت للعلوم الصرفة}, volume={17}, number={2}, pages={99-104}, year={2012}, abstract={The following study demonstrates the possibility of producing different activated carbons from a mixture of waste tires and tubes. The mixture was pyrolyzed at different temperatures namely (400,450 and 500оC) for two hours for the determination of best condition of heating. It was found through the study that semi carbonized marital produced via pyrolyis at 500 оC was the best; thus it was used as a precursor for producing different activated carbon samples. The aforementioned precursor was converted into activated carbons via different method of activation i.e. thermally activation and steam activation at 800 оC for two hours as well as microwave heating at 450 watt for four minutes.Adsorption from solution technique was used to determine the surface areas of the produced chars using I2 and methylene blue as solutes. The produced carbons showed the presence of microporosity with development in mesoporosity. This was detected from the higher surface area by I2 adsorption and lower surface area using methylene blue. Langmuir and Freundlich models of adsorption were used to analyze the adsorption date of the produced carbon adsorbents. The results showed that Langmuir model was more suitable than Freundlich to analyze the adsorption data. Thus, it was used to determine the monolayer coverage of solutes through this study. Also, adsorption isotherms followed Langmuir type of adsorption according to Giles classification which indicates the microporosity of the prepared activated carbon.

توضح الدراسة التالية إمكانية إنتاج أنواع مختلفة من الكاربون المنشط من خليط نفايات الإطارات والأنابيب. وقد تم إجراء الانحلال الحراري للخليط عند درجات حرارية مختلفة هي: (400-500 oم) لمدة ساعتين للحصول على الظروف المناسبة للدراسة. وقد تبين من خلال الدراسة أن المادة شبه الكاربونية المنتجة بالانحلال الحراري عند 500oم كانت هي الأفضل، وعليه استخدمت لإنتاج عينات مختلفة من الكاربون المنشط. لذلك تم تحويل هذه المادة شبه الكاربونية المذكورة من خلال طرق مختلفة من التنشيط مثل التنشيط الحراري والبخاري عند 800 oم لمدة ساعتين، وكذلك التسخين بواسطة المايكروويف عند 450 واط لمدة أربع دقائق.تم استخدام تقنية الامتزاز من المحلول لتحديد المساحات السطحية للفحوم المنتجة باستخدام اليود وصبغة المثيلين الزرقاء كمواد ممتزة. وأظهرت الفحوم المنتجة وجود المسامات الدقيقة مع وجود بعض المسامات الانتقالية. وقد تم استنتاج ذلك من خلال قيم المساحة السطحية العالية لامتزاز اليود مقارنة بامتزاز صبغة المثيلين الزرقاء. وقد استخدمت كل من أنماط لانكماير وفرندلج لتحليل نتائج الامتزاز. وأظهرت النتائج أن نمط لانكماير كان هو أكثر ملائمة في تحليل نتائج الامتزاز للفحوم المحضرة، وان نتائج ايزوثرم الامتزاز كانت متطابقة مع نمط لانكماير من الامتزاز طبقا لتصنيفات غيلز للامتزاز والتي تشير إلى وجود المسامات الدقيقة.} }