TY - JOUR ID - TI - Nonlinear Finite Element Analysis of Steel Fiber Reinforced Concrete Deep Beams With and Without Opening التحليلِ اللاخطّي للعتبات الخرسانية المسلحة العميقة والمقواة بألياف حديد الصلب مع و بدون الفتحات باستخدام طريقة العناصرِ المحددِة AU - Hayder Qais Majeed حيدر قيس مجيد PY - 2012 VL - 18 IS - 12 SP - 1421 EP - 1438 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - This paper presents a nonlinear finite element modeling and analysis of steel fiber reinforced concrete (SFRC) deep beams with and without openings in web subjected to two- point loading. In this study, the beams were modeled using ANSYS nonlinear finite element software. The percentage of steel fiber was varied from 0 to 1.0%.The influence of fiber content in the concrete deep beams has been studied by measuring the deflection of the deep beams at mid- span and marking the cracking patterns, compute the failure loads for each deep beam, and also study the shearing and first principal stresses for the deep beams with and without openings and with different steel fiber ratios. The above study indicates that the location of openings and the amount steel fiber are affects to the behavior and strength of deep beams. And also when the results of the experiments taken from the literature were compared with the results obtained from the beam modeled with ANSYS finite element program, it was shown that the results of computer model gave similar results to the experimental behavior.

يقدم هذا البحث نمذجة وتحليل لاخطي للعتبات الخرسانية المسلحة العميقة والمقواة بألياف حديد الصلب مع و بدون الفتحات ((SFRC متعرضة لحمل مركز بنقطتين باستخدام طريقة العناصر المحددِة . حيث تم نمذجة العتبات باستخدام برنامج ANSYS . وقد تباينت نسبة ألياف الصلب من 0 إلى %1.0. حيث يتضمن البحثً دراسة تأثير محتوى ألياف الصلب للعتبات الخرسانية المسلحة العميقة مع و بدون الفتحات من خلال قياس انحراف العتبات في وسط الفضاء و من رصد أنماط التشققات. كذلك تم حساب أحمال الفشل لجميع النماذج. أضافة الى ذلك فقد تم دراسة أجهادات القص والاجهادات الرئيسية ومن الدراسة المشار إليها أعلاه وجد أن موقع الفتحات وكمية ألياف الصلب ممكن ان تؤثر على سلوك وقوة العتبات العميقة. و أيضا وجد إن نتائج التجارب العملية التي أجريت سابقاً عند مقارنتها مع النتائج من برنامج ANSYS للعناصر المحددة، تبين أن نتائج الكمبيوتر لتمثيل النموذج تعطي سلوك مماثل للسلوك المختبري. ER -