TY - JOUR ID - TI - تأثير اضافة الكروم على الصفات الميكانيكية للمادة المركبة ذات الاساس شبه المعدني (NiAl-Al2O3) AU - Dr.Kahtan AL-Khazraji* Dr.Haydar A.Hussain ** Ahmed Mudhaffer Hashim** PY - 2008 VL - 8 IS - 2 SP - 177 EP - 184 JO - Iraqi journal of mechanical and material engineering المجلة العراقية للهندسة الميكانيكية وهندسة المواد SN - 20761819 AB - In this investigation NiAl-based composites containing a dispersion of Al2O3 particles are prepared by sintering technique at 1350°C for 90 min. in an argon atmosphere. Intermetallic compound NiAl was prepared from a mixture of nickel and aluminum powders by using reactive sintering technique at 600°C for 12 Hrs. in an argon atmosphere. To improve the ductility of NiAl three weight percents of Cr (3.5, 4, 4.5 wt %) were added to the composite (NiAl-Al2O3). Series of experiments showed that: -adding of (Al2O3) to (NiAl) leads to increase its compressive strength and its hardness but with a decrease in its ductility;-adding Cr to the intrmetallic composite (NiAl-Al2O3) leads to increase its compressive strength and its hardness with an ability to improve its ductility. An addition of (4.5 wt% Cr) to the composite containing (10wt%Al2O3) led to improve the compressive strength by (25%), hardness by (9%) and ductility by (94%) in comparison with that containing no Cr.

في البحث الحالي تم تحضير المادة المركبة ذات الأساس من ألومينايد النيكل NiAl والمقواة بدقائق أوكسيد الألمنيوم Al2O3 بواسطة تقنية التلبيد عند درجة حرارة 1350°C لمدة ساعة ونصف تحت جو من غاز الآركون وقد حضر المركب شبه المعدني NiAl بواسطة التلبيد التفاعلي لمسحوقي السبك الرئيسيين النيكل والألمنيوم عند درجة حرارة 600°C لمدة 12 ساعة. اضيفت ثلاث نسب وزنية من الكروم هي (3.5,4,4.5wt%) إلى المركب ( (NiAl.اظهرت الاختبارات بان إضافة نسب من اوكسيد الالمنيوم إلى ألومينايد النيكل NiAl تؤدي إلى زيادة مقاومة الانضغاط والصلادة ولكن مع انخفاض في المطيلية، وان إضافة الكروم إلى المادة المركبة (NiAl-Al2O3) تؤثر باتجاه زيادة مقاومتها للانضغاط وزيادة صلادتها مع امكانية الحصول على مطيلية اعلى.ان افضل النتائج التي تم الحصول عليها كانت عند اضافة كروم نسبة (4.5wt%)الى المادة المركبة(90NiAl-10Al2O3) حيث ازدادت مقاومة الانضغاط بنسبة(25%%) والصلادة بنسبة (9%) والمطيلية بنسبة (94%) بالمقارنة مع قيمها للمادة الخالية من الكروم. ER -