TY - JOUR ID - TI - Effect of Pellets Diameter and Mash Moisture Content in Pellets quality and production for fish feeding تأثير قطر الحبيبات والمحتوى الرطوبي للعليقة في نوعية وانتاج الحبيبات العلفية لتغذية الاسماك AU - Abdul-Khaliq A. F. Ahmed Ali عبدالخالق عبدالفتاح احمد علي PY - 2012 VL - 36 IS - 2 SP - 54 EP - 59 JO - The Iraqi Journal of Veterinary Medicine المجلة الطبية البيطرية العراقية SN - 16095693 24107409 AB - This research included studying some of factorial conditions manufacture of pellets are included pellet diameter by using three holes diameters for the pellets mincer (2 , 4 and 6 mm) and mash moisture content from determining two levels are (500 and 600 ml) for 1 kg from mash and effect this factorial in specific capacity and specific energy and also pellet settling velocity and water stability. The studying carried employment Completely Randomized Design (CRD) with three replications. The results showed with increase pellet diameter from 2 to 4 to 6 mm apparent. Significant effect in increase specific capacity and settling velocity. Also results to decrease specific capacity 37.87 kg / kwh and minimum specific energy 26.43 kwh/ T at pellet diameter 6 mm, and the minimum settling velocity 6.18 cm / s and maximum water stability for pellet it was pellet diameter 2 mm with increases mash moisture from 500 to 600 ml significant effect in increase specific capacity and water stability and settle velocity and was maximum specific capacity 27.39 kg/kwh and maximum water stability and minimum specific energy 40.39 kwh/ T with 600 ml mash moisture and minimum settling velocity 7.65 cm / S at 600 ml mash moisture content .

تضمن البحث دراسة بعض متغيرات ظروف تصنيع الحبيبات العلفية والتي ضمت قطر الحبيبات المنتجة باستعمال ثلاثة اقطار لثقوب التشكيل في مُعّدة الانتاج وهي 2 و 4 و 6 ملم والمحتوى الرطوبي للعليقة من خلال تحديد مستويين وهي 500 و 600 مل لكل كغم من وزن العليقة وتأثير هذه العوامل في الانتاجية النوعية (SC) والطاقة النوعية لمُعّدة الانتاج (SE)، وكذلك دراسة سرعة استقرار الحبيبات (SV) وثباتية الحبيبات في الماء (WS %) . اظهرت النتائج ان زيادة قطر الحبيبات من 2 الى 4 الى 6 ملم له تأثير معنوي (p<0.05) في زيادة الانتاجية النوعية وسرعة الاستقرار بينما ادت هذه الزيادة الى انخفاض معنوي (p<0.05) في الطاقة النوعية وثباتية الحبيبات في الماء وكانت اعلى انتاجية نوعية 37.87 كغم / كيلوواط . ساعة وادنى طاقة نوعية 26.43 كيلوواط. ساعة / طن عند قطر الحبيبات 6 ملم ، اما ادنى سرعة استقرار فهي 6.18 سم / ثا واعلى ثباتية للحبيبات كانت عند قطر الحبيبات 2 ملم. ادت زيادة المحتوى الرطوبي للعليقة من 500 الى 600 مل الى تأثير معنوي (p<0.05) ظهر في زيادة الانتاجية النوعية والثباتية في الماء وانخفضت الطاقة النوعية وسرعة استقرار الحبيبات فكانت اعلى انتاجية نوعية 27.39 كغم / كيلوواط. ساعة واعلى ثباتية في الماء وادنى طاقة نوعية 40.39 كيلوواط. ساعة / طن وادنى سرعة استقرار عند المحتوى الرطوبي للعليقة 600 مل. ER -