TY - JOUR ID - TI - Experimental Study on the Impact of External Geometrical Shape on Free and Forced Convection Time Dependent Average Heat Transfer Coefficient during Cooling Process دراسة عملية لتاثير تغيير الشكل الخارجي للجسم على المعدل الزمني لمعامل انتقال حرارة للحمل الحر والقصري خلال عملية التبريد AU - Sundus Hussein Abd سندس حسين عبد PY - 2012 VL - 8 IS - 4 SP - 74 EP - 89 JO - Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية SN - 18181171 23120789 AB - In this research, an experimental study was conducted to high light the impact of the exterior shape of a cylindrical body on the forced and free convection heat transfer coefficients when the body is hold in the entrance of an air duct. The impact of changing the body location within the air duct and the air speed are also demonstrated. The cylinders were manufactured with circular, triangular and square sections of copper for its high thermal conductivity with appropriate dimensions, while maintaining the surface area of all shapes to be the same. Each cylinder was heated to a certain temperature and put inside the duct at certain locations. The temperature of the cylinder was then monitored. The heat transfer coefficient were then calculated for forced convection for several Reynolds number (4555-18222).The study covered free convection impact for values of Rayleigh number ranging between (1069-3321). Imperical relationships were obtained for all cases of forced and free convection and compared with equations of circular cylindrical shapes found in literature. These imperical equations were found to be in good comparison with that of other sources.

تم في هذا البحث اجراء دراسة عملية عن تأثير الشكل الخارجي لجسم اسطواني على معامل انتقال الحرارة الناتج عن الحمل القسري والحمل الحر عند وضع هذا الجسم داخل مجرى هوائي وكذلك لبيان تاثير تغير موقع الجسم داخل مجرى الهواء وسرعة الهواء على قيم معامل انتقال الحرارة بالحمل القسري والحمل الحر مع تغير الشكل الخارجي . حيث تم تصنيع اسطوانات (دائرية ومثلثة و مربعة المقطع ) من معدن النحاس لموصليته الحرارية العالية بابعاد مناسبة مع المحافظة على ثبوت المساحة السطحية لجميع الاشكال وتسخينها الى درجة حرارة معينة ووضعها داخل مجرى الهواء بمواقع محددة ومراقبة انخفاض درجة حرارة الاسطوانة وتم حساب معامل انتقال الحرارة بالحمل القسري لقيم عدد رينولدز تتراوح بين (18222-4555) وبيان تاثير تغير السرعة غلى معامل انتقال الحرارة بالحمل القسري واجريت كذلك دراسة الحمل الحر وبيان تاثيره غلى معامل انتقال الحرارة لقيم عدد رايلي تتراوح بين (1069.320-3321.682). وتم الحصول على علاقة تجريبية في حالة الحمل القسري لجميع اشكال الاسطوانة وتم مقارنتها مغ المعادلات التجريبية الموجودة في مصادر الاشكال الاسطوانية الدائرية وكانت قيم الثوابت مقاربة بشكل جيد للقيم الموجودة في المعادلات التجريبية في المصادر الاخرى. ER -