@Article{, title={Dehydration of Ethanol Using Pervaporation Separation with Nanoporous Hydrophilic Silica Ceramic Membrane فصل الماء عن الكحول الاثيلي بتقنية التبخير الجزئي باستعمال غشاء نانو سيلكا hydrophilic السيراميكي}, author={Maha Hadi Al-Hassani مها هادي الحسني and Zyad Rafaa Zair زياد رافع زائر and Ameel Mohammed Rahman Al-Mayah اميل محمد رحمن المياحي}, journal={Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية}, volume={8}, number={4}, pages={106-117}, year={2012}, abstract={The pervaporation using a commercial hydrophilic ceramic membrane supplied from PERVATECH was conducted. The dehydration of ethanol/ water system was used as a model for the pervaporation study. Pervaporation experiments of ethanol/water system were carried out in the temperature range of 303-343K, ethanol concentration in the feed 10-90 vol. % and the feed flow rate in the range of 0.5-10 L/min. In this work, the effect of operation parameters on permeates fluxes as well as permeates separation factors have been studied. The Water flux is strongly dependent on the temperature; it increased with increasing in temperature, which in turn decreased the selectivity of membrane to water molecules. In addition water flux was decreased with increasing of ethanol concentration and increased with increasing feed flow rate. The optimal operational conditions of pervaporation process are: T=333 K, feed flow rate 6 L/min, and 90 vol.% ethanol concentration in the feed. High values of water flux and separation factor were obtained. The final results agreed well with other studies reported in the literature.

فصل الماء عن الكحول الاثيلي بطريقة التبخر الجزئي باستعمال غشاء hydrophilic سيراميكي تجاري من شركة PERVATECH. تم استعمال نظام الكحول/الماء كموديل لدراسة التبخير الجزئي. اجريت التجارب المختبرية بدرجات حرارة تراوحت بين 303-343 كلفن، تركيز الايثانول في اللقيم 10-90 % (نسبة حجمية) ومعدل جريان اللقيم 0,5-10 لتر/ دقيقة. تمت دراسة تاثير الظروف التشغيلية على معدل تدفق المواد، معامل الفصل للمواد النافذة، في هذا العمل. وجد ان معدل تدفق الماء يتأثر بشدة بدرجة الحرارة، اذ يزداد بزيادة درجة الحرارة ومعدل جريان اللقيم ويقل بزيادة تركيز الايثانول.كما وجد ان معدل تدفق الماء يقل مع زيادة تركيز الايثانول ويزداد مع زيادة معدل جريان اللقيم. ان افضل الظروف التشغيلية لعملية الفصل بالتبخرير الجزئي هي درجة حرارة 333 كلفن ومعدل جريان اللقيم 6 لتر/دقيقة و 90% نسبة حجمية لتركيز الايثانول وقد تطابقت هذه النتائج مع دراسات كثيرة بمراجع مختلفة.} }