TY - JOUR ID - TI - Application of Wavelet Packet and S Transforms for Differential Protection of Power Transformer استخدام تحويليتي ربطة المويجة وربطة المويجة المعدلة في الحماية التفاضلية لمحولة القدرة AU - Waad Noori Taboor وعد نوري طابور AU - Adel Ahmed Obed عادل احمد عبيد AU - Majed Abdul Nabi Alwan ماجد عبد النبي علوان PY - 2013 VL - 19 IS - 2 SP - 264 EP - 279 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - The differential protection of power transformers appears to be more difficult than any type of protection for any other part or element in a power system. Such difficulties arise from the existence of the magnetizing inrush phenomenon. Therefore, it is necessary to recognize between inrush current and the current arise from internal faults. In this paper, two approaches based on wavelet packet transform (WPT) and S-transform (ST) are applied to recognize different types of currents following in the transformer. In WPT approach, the selection of optimal mother wavelet and the optimal number of resolution is carried out using minimum description length (MDL) criteria before taking the decision for the extraction features from the WPT tree. In ST approach, the spectral energy index and the standard deviation (STD) are calculated from the S-matrix obtained by discrete S-transform. The two approaches are tested for generating a trip signal and disconnecting the transformer supply experimentally using 1KVA, 220/110V, 50Hz, three-phase transformer. The experimental results show that the trip signal is initiated faster in WPT approach while the transformer is disconnected from the supply after a delay of 10-15msec in the two approaches due to computer interface and the relay circuit used.

تبدو الحماية التفاضلية لمحولات القدرة أصعب من أية حماية لأي جزء أو عنصر في نظام القدرة. إن هذه الصعوبة تكمن من نشوء ظاهرة تيار التدفق المغناطيسي لحظة التشغيل. لذلك من الضروري التمييز بين تيار التدفق والتيارات الناشئة من تيارات الخطأ الداخلية. في هذا البحث تم استخدام طريقتين للتمييز بين تيار التدفق وتيارات الخطأ الداخلية اعتمادا على تحويله ربطة المويجة وتحويله ربطة المويجة المعدلة. في الطريقة الأولى تم اختيار المويجة الأم وأفضل مستوى حل باستخدام دالة الطول الأصغر قبل اتخاذ قرار استخلاص المعالم من شجرة تحويله المويجة. في الطريقة الثانية تم حساب دليل الطاقة الطيفية والانحراف القياسي من مصفوفة S التي حسبت من تحويله ربطة المويجة المعدلة. اختبرت كلا الطريقتين لتوليد إشارة عزل المحولة من المصدر عمليا باستخدام محولة ثلاثية الطور 1KVA, 220/110V, 50Hz . أظهرت النتائج العملية بأن إشارة العزل تتولد أسرع في الطريقة الأولى بينما تنعزل المحولة عن المصدر بعد تأخير زمني من 10-15 ملي ثانية في كلا الطريقتين بسبب توصيلة الحاسبة ودائرة المرحل المستخدمة. ER -