TY - JOUR ID - TI - دراسة العلاقة المتبادلة بين أثار البيئة السيئة في عمر إطراف الأقواس المشيدة من الخشب البلاستيكي والخسائر الزحفية AU - رولا عبد الخضر عباس PY - 2012 VL - 15 IS - 4 SP - 12 EP - 24 JO - Al-Nahrain Journal of Science مجلة النهرين للعلوم SN - 26635453 26635461 AB - In this study an attempt capitalize on wood industry residues in Iraqi architecture after particle wood production in the construction of halls in engineering arches due to environment absence of good timber species. On the subject attended of particles thermosetting wood consists of unsaturated of polyester reinforced of beech wood shell particles again say wood shell particles once، and the (gam) wood shell particles again of particles size ranging between (63-32) were added to each species of particle wood construction (Gypsum) with improving the quality of processed (magnesium oxide and titanium oxide paint). On the study of their characteristics on the problem of flexural creep under four – point loading on horizontal acre from constructions and its effect on bending the pins resist change under load for a long time is the timber processed timer in flexural creep modulus as a result of exposure to solar radiation at length in particular (UV-B) serious damage which lead polyester body failing overlapping to creep resist. But this deterioration of creep resist found less with the use of titanium oxide in preparing this wood. The results also showed in all circumstances must be borne in mind that does not mean that natural beech wood of beech, (Sag) and (Gam) who owns a large of resistant creeps proportion of resistant creeps into lumber plastic to record the best natural wood ... It has been monitoring the possible loss of this wood properties of toughness (flexural creep modulus) after 2 hours of immersion in boiling distilled water and two peried after heating to heat arrived (120 0C) exceeds the amount of loss caused to industrial wood.

تمت دراسة أثار البيئة السيئة (من درجة الحرارة والرطوبة والأشعة فوق البنفسجية) على مقاومة الزحف ألانعطافي تحت حمل رباعي الركيزة المطلوب معرفتها للتراكيب المقوسة الأفقية من الأخشاب البلاستيكية المكونة من مادة البولي استر غير المشبع المقواة بحبيبات (نشارة) خشب الزان مرة وحبيبات الصاج مرة وحبيبات إلجام مرة أخرى وبقياس حبيبي يتراوح مابين (63-32µm) مع إضافة لكل نوع من هذه الحبيبات الخشبية الجبس الإنشائي (Gypsum) مع عوامل تحسين النوعية المتمثلة بأوكسيد المغنسيوم وصبغة أوكسيد التيتانيوم مع العلم بأن نسبة الكسر الوزني لجميع هذه المتراكبات المحضرة هي 33%.فقد أوضحت النتائج العملية إمكانية الاستدلال بالآثار الكيميائية للأشعة فوق البنفسجية من الأشعة الشمسية على هذه الأخشاب البلاستيكية المحضرة من مقدار الانحدار الحاصل في معامل زحفها ألانعطافي خلال فترة تعريض امتدت من (53 إلى 86 يوم) ضمن شهر حزيران وتموز وأب مما يؤثر بمرور الوقت بصورة بالغة على مقاومة جسم المتراكب البوليمري للزحف إلا أن هذه القدرة على التدهور في مقاومة الزحف وجد أنها تقل مع استعمال أوكسيد التيتانيوم في تحضير هذه الأخشاب.ومن الملاحظ أيضا من النتائج العملية امتلاك الخشب الطبيعي من الزان والصاج والجام مقاومة زحف كبيرة نسبة إلى الخشب البلاستيكي المحضر لكن هذا لا يعني أن هذا الخشب الطبيعي أفضل. فقد تم رصد أمكانية فقد هذا الخشب لخواص المتانة (معامل الزحف الانعطافي) بعد مرور ساعات من الغمر في الماء المقطر المغلي وكذا بعد مرور دورتان من التسخين لدرجة حرارية وصلت إلى (120 0C) يفوق مقدار الفقد الحاصل للخشب الصناعي المحضر. ER -