TY - JOUR ID - TI - Experimental Study of Lightweight Concrete Flat Plate with Sandwich Shear Plates دراسة مختبريه للبلاطات المسطحة المصنوعة من الخرسانة الخفيفة الوزن مع صفائح القص المزدوجة AU - Jamal Saeed Al-Abasi جمال سعيد العباسي AU - . Mohammed M. Rasheed PY - 2012 VL - 16 IS - 4 SP - 107 EP - 126 JO - Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة SN - 25200917 25200925 AB - The study presents an experimental investigation on the influence of embedded steel plate (sandwich) as shearhead reinforcement on the punching shear strength of reinforced light concrete flat plates.Five half-scale models of slab-column connection of (1000 x 1000 x 70mm) simply supported along the four edges are tested. The slabs are loaded concentrically by a central stub column. The variables studied are; the thickness (2 and 4mm) and the dimensions (90mm x 150mm and 180mm x150mm) of steel plate. Results indicate that the effect of increasing of the thickness and steel plate dimensions, and shear connectors spacing improve the resistance to punching shear, enhance type of failure and increase the value of the ultimate load capacity. The ultimate load increases by about (47.57and 73.79%) of the maximum ultimate load for the plate thickness 2 and 4mm respectively while the spacing between the shear connectors is (d/2) and about (59.22 and 88.35%) for the thickness 2 and 4mm while the spacing between shear connectors is (d).

يقدم هذا البحث دراسة عملية لتأثير استخدام تسليح القص الخاص المطمور) ساندوج) على مقاومة القص الثاقب للبلاطات المستوية المسلحة الخفيفة الوزن. خمسة نماذج أعدت بإبعاد (1000x1000x70( ملم ذات إسناد بسيط على طول حافاتها الاربعه. كل البلاطات محمله مركزيا بواسطة عمود مرتبط مع السقف. المتغيرات التي تم دراستها هي: السمك (2و4) ملم والأبعاد (90*150 و180*150) ملم للصفائح الحديدية. أظهرت النتائج تأثير (زيادة السمك، أبعاد الصفيحة، مسافات الروابط القصية) على مقاومة القص الثاقب، شكل الفشل على البلاطة. وإن قيمة الحمل الأقصى يتراوح من (47،57 و 73،79%) عندما يكون سمك صفائح التقوية هي 2 و 4ملم على التوالي بينما المسافة بين الروابط القصية هي d/2 , وعندما كانت المسافات بين الروابط القصية d كانت الأحمال القصوى تتراوح (59،22 و 88،35%) لنفس سمك صفائح التقوية 2 و 4 ملم. ER -