@Article{, title={Evaluation of the local scour downstream untraditional bridge piers تقويم النحر الموضعي مؤخر دعامات الجسور غير التقليدية}, author={. Hamid H. Hussein and Inam A. K. Juma and Nashwan I. Hammo}, journal={Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة}, volume={16}, number={3}, pages={36-49}, year={2012}, abstract={The reduction of local scour downstream bridge piers got a massive concentration by several studies. In this study the D/S edge of the rectangular section semicircular bridge pier was reduced. This reduction was built to determine its influence on the local scour D/S these piers. Four models of the piers were manufactured from thermo-stone. The upstream semicircle diameter was fixed by a 10 cm, while the D/S diameter was changed to 4,6,8 and 10 cm . The experimental results provide evidence that the reduce of the D/S diameter of the pier leads to decrease the D/S scour depth and length . Moreover, in its place the sand was noticeably deposited D/S the pier. The experimental results was used to develop two liner empirical relations the first to estimate the ratio of maximum scour depth to U/S diameter of the pier ds/d1 . While the second to estimate the ratio of the length of scour to U/S diameter of the pier X/d1 , in terms of the ratio for D/S diameter of the pier to U/S diameter of the pier d2/d1 , length of the scour U/S the pier to D/S diameter Z1/d2, maximum width of scour to D/S diameter Z2/d2 , maximum height of sand deposition D/S of the pier to D/S diameter y/d2 and Froude number Fr. Furthermore, the two empirical relations were compared with the results of the artificial neural network (ANN). The utilize of ANN techniques yields superior results for predicting the maximum depth and length of scour D/S these piers

إن تقليل النحر الموضعي مؤخر دعامات الجسور قد اخذ اهتمام كبير من قبل العديد من الدراسات. في هذه الدراسة تم تصغير قطر نهاية الدعامة مستطيلة المقطع ذات النهايات نصف دائرية. أجري هذا التصغير لغرض قياس تأثيره على النحر الموضعي مؤخر الدعامات . تم اختيار أربعة نماذج صنعت من مادة الثرموستون. الجزء نصف دائري مقدم الدعامة وبقطر 10 سم لم يتم تغيره , بينما تم تغير أقطار مؤخر الدعامات وبأقطار 8,6,4 و10سم . أثبتت النتائج المختبرية بأن تصغير قطر مؤخر الدعامة أدى إلى تقليل عمق وطول النحر الموضعي . بالإضافة إلى ذلك , وبدلا عنه فأن الرمل قد ترسب وبوضوح مؤخر الدعامة. كما استخدمت النتائج المختبرية لاستنباط علاقتين وضعيتين خطيتين الأولى لنسبة العمق الأقصى للنحر إلى قطر مقدم الدعامة ds/d1 . بينما الثانية لنسبة طول النحر إلى قطر مقدم الدعامة X/d1 وبدلالة نسبة قطر مؤخر الدعامة إلى قطر مقدمهاd2/d1 , نسبة طول النحر مقدم الدعامة إلى قطر مؤخرها Z1/d2 , نسبة أقصى عرض للنحر إلى قطر مؤخرها Z2/d2 , نسبة أقصى ارتفاع لترسيب الرمل مؤخر الدعامة إلى قطر مؤخرها y/d2 و رقم فرود Fr . بالإضافة إلى ذلك فأنه تم مقارنة العلاقتين الوضعيتين مع نتائج الشبكة العصبية الاصطناعية ANN . أن استخدام تقنيات ANN أعطى تفوق بالنتائج للتنبوء بعمق وطول النحر مؤخر هذه الدعامات.} }