TY - JOUR ID - TI - Simulated canine retraction with different sizes of stainless steel archwires (An in-vitro study) AU - Yassir A. Yassir ياسر عبد الكاظم ياسر PY - 2012 VL - 24 IS - 1 SP - 146 EP - 150 JO - Journal of baghdad college of dentistry مجلة كلية طب الاسنان بغداد SN - 18171869 23115270 AB - Background: This study aimed to assess five different sizes of archwires regarding canine retraction and distopalatalrotation in an invitromodel.Materials and method: A total of 50 acrylic canine teeth were fabricated as a replica to a natural tooth, to which0.022×0.030 inch slot standard edgewise brackets were bonded. They were ligated to straight .018 inch, 0.016×0.022inch, 0.017×0.022 inch, 0.018×0.022 inch, and 0.019×0.025 inch stainless steel archwires using loose steel ligature wire.The teeth were moved through softened wax (at 50°C) along the archwires using NiTi closed coil springs then theamount of tooth movement, and the degree of rotation were measured.Results: The descriptive statistics showed that the maximum distance of canine retraction and rotation was with 0.018inch wire, while the minimum was with 0.019×0.025 archwire. For canine retraction only a non-significant differencesbetween 0.016×0.022 and 0.017×0.022 archwires and between 0.018×0.022 and 0.019×0.025 archwires were found,while for canine rotation the non-significant differences were between 0.017×0.022 and 0.018×0.022 archwires andbetween 0.018×0.022 and 0.019×0.025 archwires as detected by ANOVA test and post hoc Scheffe test. Pearsoncorrelation coefficient test revealed non-significant correlation between the distance moved by the canine and itsdegree of rotation.Conclusion: The greatest amount of canine retraction and rotation achieved with 0.018 inch stainless steel archwire,while the opposite occurred with 0.019×0.025 inch wire. 0.017×0.022 inch archwire combined properties acceptableboth regarding canine retraction and rotation.

المقدمة: ھدفتْ ھذه الدراسةِ لتَقییم خمسة أحجام مختلفةَ من أسلاك التقویم فیما یتعلق بسحب ودوران الناب في دراسة مختبریة.0.030 بوصةِ. وتم ربطھا الى × المواد والطریقة: ما مجموعھ 50 ناب أكریلیكِ صُنِعتْ كنسخة طبق الأصل إلى سنّ طبیعي، ولصقت علیھا حواصر بقیاس الشق الداخلي 0.0220.025 بأستخدام روابط × 0.022 بوصة، و 0.019 × 0.022 بوصة، 0.018 × 0.022 بوصة، 0.017 × اسلاك تقویم فولاذیة مقاومة للصدأ مستقیمة بقیاسات 0.018 بوصة، 0.016معدنیة فضفاضة. حُرّكتْ الأسنان خلال الشمعِ الناعمِ في 50 درجة مئویة بواسطة نوابضحلزونیة مغلقة من مادة النیكل تیتانیومِ، ثمّ قِیستْ كمیة حركةِ السنِّ ودرجة الدورانِ.0.025× النَتائِج: أظھر الإحصاء الوصفي بأنّ المسافةَ القصوى لحركة ودوران الناب كَانَ مع سلك التقویم بقیاس 0.018 بوصةِ، بینما الحَدّ الأدنى كَانَ مع سلك التقویم بقیاس 0.0190.025 . بینما لدوران الناب، × 0.022 و 0.019 × 0.022 ، وبین 0.018 × 0.022 و 0.017 × بوصة. فیما یخص حركة الناب وُجدت أختلافات غیر ھامة فقط بین الاسلاك بقیاس 0.0160.025 ، كما توضح بإختبار أنوفا وبعد ھذا إختبار شیف. كَشفَ إختبارُ معاملِ × 0.022 و 0.019 × 0.022 وبین 0.018 × 0.022 و 0.018 × الإختلافات غیر الھامّة كَانتْ بین 0.017إرتباطِ بیرسون وجود إرتباط غیر ھامّ بین مسافةِ تَحرّكَ النابِ ودرجة دورانھ.0.025 بوصةِ. سلك التقویم × الخلاصة: الكمیة الأعظم لسحب ودوران الناب أنجزا بسلك التقویم الفولاذي المقاوم للصدأ 0.018 بوصةِ، بینما العكس حَدثَ مع السلك بقیاس 0.0190.022 بوصة یجمع خصائصمقبولةَ فیما یخصسحب ودوران الناب ER -