TY - JOUR ID - TI - Behavior of Composite Reinforced Concrete T-Beams having Different Combinations of Headed and Unheaded Shear Studs Embedded in tensioned Concrete Zone تصرف العتبات المركبة الخرسانية المسلحة ذات المقطع T والتي تتمتع بتوليفات مختلفة من روابط القص ضمن منطقة الشد الخرساني AU - Mohammed Raji Mohammed Al-Alusi محمد راجي محمد الآلوسي PY - 2013 VL - 17 IS - 1 SP - 1 EP - 13 JO - Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة SN - 25200917 25200925 AB - Four simply supported composite reinforced concrete T-beams of webs partially cast in steel channels were manufactured and loaded till failure in the laboratory by four-point loading condition simulating approximately the control 1-m uniformly distributed load, to determine their load midzspan deflection and load-relative interface end slip relationships. Three of those beams were provided with effectively spaced headed studs. The main variables are the elimination of the heads of the studs shear connectors and the locations of such head- less studs. While the studs of the first of those three beams were all provided by enlarged heads, the heads of all studs of the second beam are removed. The remaining beam included exterior abundant headed studs and interior distant studs without heads. Additional digital- interpreted results evaluating parameters representing the flexural behavior and the ''Integrity characteristics'' of such beams were also determined to investigate the effects of such uses and distributions of unheaded studs on those two main characters of composite beams. The present study showed that heads of the exterior abundant stud shear connectors have vital effect on the flexural stiffness and slight effects on the flexural resistance and ductility, and the relative end slip at interfaces. The study also verified that the heads of the interior distantly-spaced stud shear connectors have major positive effects on the ultimate deflection and the flexural stiffness

تم اختيار أربع عتبات خرسانية مركبة بشكل حرف T بسيطة الإسناد وذات جذوع مصبوبة جزئياً في قنوات حديدية وحملت هذه العتبات في المختبر حتى الفشل وتحت حالة تحميل ذات أربعة نقاط وذلك لتشبيه النموذج المرجعي ذي التحميل المنتظم تقريبياً . لقد كان الغرض من ذلك تحديد علاقات الحمل- الهطول لمنتصف العتبة والحمل- الزحف للطبقة الوسطية لهذه العتبات. وكذلك تم تجهيز ثلاث عتبات من هذه الأربعة بقضبان قص ذات رؤوس موزعة بشكل مؤثر. وكانت المتغيرات المدروسة ، وجود الرؤوس من عدمها في قضبان القص وكذلك تباعد القضبان من غير ذوات الرؤوس . بينما جهزت قضبان القص في النموذج الأول برؤوس موسعة رفعت هذه الرؤوس من النموذج الثاني كلياً. وضعت قضبان قص ذات رؤوس عند الأطراف والعديمة الرؤوس في الوسط في العتبة الأخرى. أخذت نتائج أخرى بقراءات رقمية لمتغيرات تعكس السلوك الانحنائي " وخصائص التكامل " لمثل هذه العتبات وذلك لدراسة تأثير توزيع القضبان ذوات الرؤوس على مثل هذه المتغيرات . أظهرت الدراسة الحالية أن لتوزيع قضبان القص عند الجهة الخارجية تأثيراً مهماً على جساءة الانحناء وتأثيراً ثانوياً على مقاومة الانحناء والمطيلية والانزلاق النسبي عند النهايات. كذلك أكدت الدراسة أن رؤوس القضبان الوسطية المتباعدة لها تأثيراً ايجابي واضح على الانحراف النهائي و الجساءة الانحنائية. ER -