TY - JOUR ID - TI - Effect of Addition Carbon And Glass Fibers On Bond Strength of Steel Reinforcement and Normal Concrete تأثيراضافة الالياف الكاربونية والزجاجية على مقاومة الربط لحديد التسلح والخرسانة الاعتيادية AU - Rana Hashim Ghedan PY - 2013 VL - 31 IS - 1 Part (A) Engineering SP - 81 EP - 97 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - The concept of composite materials using fibers as reinforcement is not new. The aim of composing materials is to improve some properties of the original materials. In civil engineering, fiber reinforced concrete was one of the topics of interest. Using fibrous concrete in reinforced concrete structures arises a question of how does it affect the bond strength between the concrete and reinforcing steel bars. Thus, the present experimental study are carried out to have a clear understanding of the bond strength between normal concrete with two selected types of fibers which were carbon and glass fiber and steel reinforcing bars. Forty five pullout cubic specimens of size 150mm were fabricated and tested to serve that purpose. They were divided into five groups to study the effect of some selected parameters such as, type of fiber (carbon and glass),reinforcing bar diameter(12mm,16mm and 20mm)and fiber to cement ratio(f/c) by weight(0.75% and 1% ). Also, three concrete cubes having the same size of the pullout specimens from each concrete mix were tested in compression to find their compressive strength. It was found that the addition of glass fiber with bar diameter=16mm has much effect in enhancing bond strength than that enhancement accrued by addition of carbon fiber, the bond strength increases by about 13.6 % and 4.5 % with the addition of 0.75% and 1% glass fiber. On the other hand, the bond strength increases as bar diameter decreases.The addition of the carbon or glass fibers increases the bond strength for specimens with smaller bar diameter and vice versa and the fiber(either glass or carbon) to cement ratio of 0.75% give higher bond strength than that of 1.0%.

إن مفهوم المواد المركبة باستعمال الألياف كتسليح ليس حديثا. أن الهدف من المواد المركبة هو تحسين بعض خواص المواد الأصلية. الخرسانة المسلحة بالألياف واحدة من أهم المواضيع في الهندسة المدنية. ان استعمال الخرسانة المسلحة الحاوية على الألياف يثير تساؤل عن مدى تأثيرها على قوة الترابط بينها وبين قضبان حديد التسليح.أجريت الدراسة العملية الحالية للحصول على فهم واضح لقوة الترابط بين الخرسانة الاعتيادية باستعمال نوعين مختارين من الألياف الزجاجية والكاربونية وقضبان حديد التسليح. تم تصنيع وفحص خمس وأربعون نموذج سحب مكعب بإبعاد 150ملم للوصول إلى ذلك الهدف. قسمت هذه النماذج إلى خمس مجاميع لدراسة تأثير بعض المتغيرات المختارة كنوع الألياف المستعملة(الكاربونية والزجاجية)وقطر قضبان التسليح (12ملم و16ملم و20ملم) والنسبة الوزنية للألياف إلى الاسمنت (0.75%و0.1%). فحصت ثلاث نماذج مكعبة بنفس حجم تلك المستعملة في فحص الربط من كل خلطة لإيجاد مقاومة الانضغاط لكل منها. وجد بان التحسن الحاصل في قوة الربط باستعمال الألياف الزجاجية مع استعمال قطر حديد تسليح =16ملم اكبر من ذلك الحاصل باستعمال الألياف الكاربونية حيث تزداد قوة الربط مع الألياف الزجاجية بنسبة تسليح 13,6% و4,5% عند استعمال هذه الألياف بنسبة 0,75% و 1% .ان قوة الربط تزداد بنقصان قطر قضبان حديد التسليح. إن إضافة ألياف الكاربون والألياف الزجاجية يحسن قوة الربط بين الخرسانة وبين قضبان حديد التسليح الأصغر والعكس بالعكس.أعطت النسبة الوزنية للألياف (سواء كانت زجاجية أم كاربونية) 0,75% نتائج أفضل لقوة الانضغاط من تلك التي أعطتها النسبة الوزنية 1,0%. ER -