@Article{, title={The dynamical work of continuous CO2 laser and studying some of plasma parameters produced by laser ديناميكية تشغيل ليزر ثاني اوكسيد الكاربون المستمر ودراسة بعض معلمات البلازما المنتجة باليزر}, author={Awatif Sabir Jassim عواطف صابر جاسم}, journal={Academic Science Journal مجلة العلوم الاكاديمية}, volume={9}, number={1}, pages={24-41}, year={2013}, abstract={In this paper we introduce a modified continuous CO2 laser ( CW CO2 laser ) hence some changes in the principle constitutions were done, such that , the continuous power supply with output voltage of 12 KV and 100 mA . For the purpose of measuring the effect of temperature of laser medium on basic parameter, the system was connected to digital thermometer. The measurement of some basic parameters and its effect on the output power of laser and the selection of optimum condition for operating the system in case of operating by using three gas cylinders (CO2, N2, He) separately and the other by using gas mixture of ( He: 82%, N2: 13.5%, Co2: 4.5% ) , three factors were subjected to change , first, the change of pressure of gas mixture inside the electric discharge tube, second, the effect of changing the electric discharge current, third, the effect of changing the ratio of He gas in the gas mixture were achieved the experimental results shows that the best pressure for gas mixture to produce the laser is ( 30 mbar ) while it was ( 25 mbar ) in using each gas separately by ratios ( 10: 15: 75 )% for ( CO2, N2, He ) respectively with different discharge currents . 12 mA was found to be the best discharge current and 75% was the best ratio for He in gas mixture . The characteristics of plasma-laser CO2 was studies, the theoretical value of the output power laser were determined and compared with measured value

تم في هذه الدراسة تأهيل منظومة ليزر ثاني أوكسيد الكاربون المستمر ( CW Co2 Laser ) حيث تم تغير بعض المكونات الأساسية للمنظومة ، ومن هذه المكونات مجهز القدرة الكهربائي المستمر بفولتية خرج مقدارها (12KV ) وتيار (100 mA) . لغرض قياس درجة الحرارة تم ربط المنظومة بمقياس رقمي (Digital Thermometer) حيث تم من خلاله دراسة تأثير درجة حرارة الوسط الليزري على المعلمات الأساسية. تم خلال هذه الدراسة قياس بعض المعلمات الأساسية وتأثيرها على قدرة الخرج الليزري واختيار الشروط المثلى للتشغيل المنظومة في حالتي تشغيل المنظومة باستخدام ثلاث أسطوانات للغازات (CO2 -N2 -He) على انفراد ، والحالة الثانية استخدام خلطة غازية مجهزة من قبل شركة (PHWY) الألمانية وبنسب (He:82% -N2:13.5% -CO2:4.5%) . وتم دراسة بعض المعلمات وتأثيرها على قدرة خرج ليزر CO2 من خلال دراسة تغيير ضغط الخليط الغازي داخل انبوبة التفريغ الكهربائي ، وكذلك تأثير تغيير تيار التفريغ الكهربائي إضافة إلى تأثير تغيير نسبة غاز He في خليط الغازات على هذه القدرة . أظهرت النتائج العملية ان أفضل ضغط لخليط الغازات الجاهزة لتوليد الليزر هو (30 mbar) بينما كان أفضل ضغط عند استخدام الغازات كلٌ على انفراد هو ( 25 mbar ) بنسب (% (10:15:75)للغازات ( CO2 , N2 , He) على التوالي عند تيار التفريغ مختلفة ، اما أفضل تيار تفريغ فكان ( 12 mA ) ، اما أفضل نسبة لغاز الهليوم في خلطة الغازات كانت ( 75% ) .وكذلك تم دراسة خصائص بلازما ليزر CO2 والتوصل الى القيمة النظرية لقدرة الخرج الليزري ومقارنة هذه القيمة مع القيمة العملية المحسوبة.} }