TY - JOUR ID - TI - Effect of Asperity Height on Wear Behavior by Finite Element Method AU - Ahmed Hadi Abood PY - 2012 VL - 20 IS - 4 SP - 1084 EP - 1110 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - This paper presents an investigation of contact surface interface, which is of strong interest for wear applications. The prediction of the wear depth in contact surfaces is thus a challenging task. The effect of the asperities height (0.045, 0.055, 0.065, and 0.07 )mm, the applied forces and the shape of the contact surfaces on the wear depth and contact pressure are investigated by finite element method via ANSYS software. Wear simulation approach based on Archard’s model was proposed, in which ANSYS was used to simulate the progressive accumulation of wear between contact surfaces. Results showed that the wear behavior can be simulated with the series of discrete models and the method proposed can be widely used to predict wear problems for engineering. Two cases are studied, the first one is for rectangular contact surfaces and the other for circle- rectangle contact surfaces with different height of asperities. It was also concluded that the increased of contact’s time caused the wear depth for different asperities increased and vice versa for contact pressure.

تمت الدراسة باستخدام طريقة العناصر المحددة. فقد تم التنبؤ بعمق البلى في الأسطح المتلامسة. حيث انه تم دراسة تأثير ارتفاع asperities (0.045 ، 0.055 ، 0.065 ، 0.07 ) ملم والقوى المسلطة على عمق البلى وشكل اسطح التلامس بواسطة طريقة العناصر المحددة من خلال برنامج ANSYS. حيث انه تم محاكاة العملية باستخدام نموذج المحاكاة على أساس نموذج Archard. وقد بينت النتائج أن سلوك البلى يمكن أن تكون محاكاة لسلسلة من النماذج المتميزة، وأن الطريقة المقترحة هي الافضل على نطاق واسع للتنبؤ بمشاكل البلى الهندسية . فقد تم دراسة حالتين، الأولى هي للأسطح المتلامسة ذات شكل مستطيل والآخر للأسطح المتلامسة ذات شكل دائرة - مستطيل. ولقد بينت الدراسة انه عند زيادة وقت التلامس فان عمق البلى سوف يزداد ويقل ضغط التلامس ER -