@Article{, title={Theoretical and Experimental Investigation of the Effect of the Punch Angle on the Backward Extrusion Process}, author={Ethar Mohammed Mahdi}, journal={Journal of University of Babylon مجلة جامعة بابل}, volume={20}, number={4}, pages={1136-1149}, year={2012}, abstract={The variation of punch angle on the flow metal for the backward extrusion is investigated theoretically and experimentally. Punches with different semi-cone angles varying from 30, 60, 70, 90 ° have been used to study its effect on the pressure required to extrude indirectly for lead. The findings of this experimental study show agreement in trends with the theoretical predictions. From this study it can be concluded that by a little change in the backward reduction in cross- sectional area different types or modes of extrusion process may be obtained and the streamline profile of the punch surface have an important effect in homogeneity of the material flow in the backward direction i.e. that the working pressure decreased when increasing the punch angles, the fact that the redundant strains will be decreased and there will be less restriction on the material flow also due to the complex deformation situation during the backward extrusion and availability of more than one type of velocity field through the process duration, finite element analysis via ANSYS software may be the superior for application.

تم دراسة تغيير زاوية المخرم على جريان المعدن خلال عملية البثق العكسي حيث تمت الدراسة نظريا وعمليا . وقد استخدمت زوايا مختلفة للمخرم هي 30 و 60 و 70 و 90 درجة لدراسة تأثيرها على الضغط اللازم للبثقالغير مباشر لمادة الرصاص . تشير نتائج هذه الدراسة إلى تطابق بين النتائج التجريبية مع التنبؤات النظرية . يمكن أن نستنتج من هذه الدراسة بان تغيير قليل في مساحة انخفاض مقطع البثق العكسي يؤدي الى أنواع مختلفة من اطوار البثق وان انسيابية شكل المخرم له تاثير كبير على جريان المعدن بما معناه ان القوة تقل عند زيادة زاوية المخرم. والحقيقة أنه سيتم خفض الانفعالات الزائدة عن الحاجة وسيكون هناك قيود أقل على تدفق المعدن بسبب الحالة المعقدة للتشوه التي تحصل في عملية البثق العكسي. ان طريقة العناصر المحددة باستخدام برنامج ANSYS تعتبر من افضل الطرق لتحليل عملية البثق.} }