TY - JOUR ID - TI - Effect of Laser Surface Treatment on Physical Properties of Composite Material (Al-B4C) تأثير المعاملة الحرارية السطحية بالليزر على الخواص الفيزياوية لمادة متراكبة (Al-B4C) AU - Khansaa D. Selman خنساء داود سلمان AU - Sabah N. Mahmood صباح نوري محمودد AU - Qamar Q. Mohameed قمر قاسم محم PY - 2013 VL - 54 IS - 4 SP - 882 EP - 887 JO - Iraqi Journal of Science المجلة العراقية للعلوم SN - 00672904 23121637 AB - This work study the effect of laser surface heat treatment on physical properties (green density, density after sintering, theoretical density and porosity)of a composite material of an Al powder as a matrix with different percentage of B4C powder as additive material. This work was done by two stages: First stage: Production the maincomposite material which is contain Al powder with grain size 24μm as a matrix and B4C powder with grain size 50μm as additive with different weight percentage (5%,10%,15%,20%,25%,30%), and the powders Maxined for suitable time 15min, after that the mixture compacted with 2ton and sintered at 550C0. Second stage: Laser surface treatment was done for the productive composite material after sintering by using pulse Nd: YAG laser with 1J energy, wave length 1064nm and pulse duration 100ns.Laser surface heat treatment was carried out with one pulse and two pulses respectively. Macrohardness of the composite material was measured after the sintering process and after the laser surface heat treatment with one pulse and two pulses, also photo-micrographies were taken for the specimens by using ordinary microscopic after each of sintering process and laser surface heat treatment. The results show that improvement of physical properties mentioned above and macrohardness after laser surface treatment with two pulses more than one pulse.

في هذا البحث تمت دراسة تاثير المعاملة الحرارية السطحية بالليزرعلى الخواص الفيزياوية (الكثافة الخضراء ,الكثافة بعد التلبيد, الكثافة النظرية والمسامية) لمادة متراكبة من مسحوق الالمنيوم كمادة اساس مع نسب مختلفة من مسحوق رابع كاربيد البورون (C4B) كمادة مضافة. تم اجراء البحث على مرحلتين: المرحلة الاولى: انتاج المادة المتراكبة المتكونة من مسحوق الالمنيوم بحجم حبيبي كمادة اساس مع مسحوق (C4B) بحجم حبيبي كمادة مضافة وبنسب وزنية (%5,% 10,%15,%20,%25,%30), ومن ثم تمت عملية خلط المساحيق لمدة min15 ,بعد ذلك اجريت عملية التدميج بكبس الخليط بضغط والتلبيد عند درجة حرارية . المرحلة الثانية: اجريت المعاملة الحرارية السطحية بالليزر للمادة المتراكبة المنتجة بعد عملية التلبيد باستخدام ليزر نيديوم – ياك النبضي بطاقة مقدارها , بطول موجة nm1064 وزمن نبضة ns100. وقد اجريت المعاملة السطحية بالليزر بنبضة واحدة وبنبضتين على التوالي. تم حساب الصلادة الماكروية للمادة المتراكبة بعد التلبيد وكذلك بعد المعاملة السطحية بالليزر لنبضة واحدة ونبضتين, كذلك تم تصوير العينات باستخدام المجهر الضوئي الاعتيادي للعينات بعد كل من عملية التلبيد والمعاملة السطحية بالليزر.اظهرت النتائج تحسن في الخواص الفيزياوية المذكورة في اعلاه وكذلك الصلادة الماكروية بعد المعاملة السطحية بالليزر بنبضتين اكثر مما هو عليه للنبضة الواحدة. ER -