TY - JOUR ID - TI - Pressure Control of Electro-Hydraulic Servovalve and Transmission Line Effect السيطرة على الضغط باستخدام الصمام الموازر الكهروهيدروليكي وتاثير الخط الناقل للهيدروليك AU - Ahmed Fouad Mahdi احمد فؤاد مهدي AU - Majid Ahmed Oleiwi ماجد احمد عليوي AU - Yiqin Xue يكن اكسو AU - Jafar Mehdi Hassan جعفر مهدي حسان PY - 2013 VL - 9 IS - 3 SP - 80 EP - 99 JO - Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية SN - 18181171 23120789 AB - The effected of the long transmission line (TL) between the actuator and the hydraulic control valve sometimes essentials. The study is concerned with modeling the TL which carries the oil from the electro-hydraulic servovalve to the actuator. The pressure value inside the TL has been controlled by the electro-hydraulic servovalve as a voltage supplied to the servovalve amplifier. The flow rate through the TL has been simulated by using the lumped π element electrical analogy method for laminar flow. The control voltage supplied to servovalve can be achieved by the direct using of the voltage function generator or indirect C++ program connected to the DAP-view program built in the DAP-card data acquisition connected to PC, to control the value of pressure in a selected point in the TL. It has been found that the relation between the voltage value and the output flow rate from the servovalve in most of the path is a linear relation. The MATLAB m-File program is used to create a representation state of the mathematical model to find a good simulation for the experimental open loop control test.

في بعض الحالات يعتبر الخط الناقل للهيدروليك بين المستهلك (المحرك) و صمام السيطرة مهم ومؤئر. هذه الدراسة تركز على نمذجة الخط الناقل للهيدروليك الواصل بين صمام السيطرة الموازر الكهروهيدروليكي والمستهلك. تمت السيطرة على قيمة الضغط داخل الخط الناقل من خلال السيطرة على قيمة الفولتية الواصلة الى المضخم الخاص بصمام الموازر. تمت نمذجة الجريان الطباقي داخل الخط الناقل باستخدام طريقة π للكم لتحويل الخط الناقل الى منظومة كهربائية. تم استخدام الطريقة المباشرة في التحكم بالفولتية من خلال جهاز مولد دالة الفولتية وبشكل غير مباشر من خلال استخدام برامج ال (C++) والذي يرتبط مع برنامج (DAP-view) المنصب اصلا في الدائرة الكهربائية (DAP-card) التي يمكن أضافتها الى الكومبيوترات الشخصية للسيطرة على قيمة الضغط داخل الخط الناقل عند نقطة معينة مختارة. تم التوصل الى ان العلاقة بين الفولتية والجريان الخارج من صمام الموازر في اغلب الاحيان علاقة خطية. تم استخدام برنامج الماتلاب (m-file) لايجاد حالة تمثيل رياضي و وجد بأن النتائج كانت جيدة لحالة السيطرة على الدائرة المفتوحة ومتماثل مع التجارب العملية ER -