TY - JOUR ID - TI - IMPROVE PERFORMANCE OF ASPHALT CONCRETE OVERLAY BY USING SBR AS MODIFIED AU - Dr. Riadh A. Abass AU - Dr. Abdulaziz A. Kifae AU - Hayder K. Shanbara PY - 2013 VL - 6 IS - 3 SP - 247 EP - 267 JO - Al-Qadisiyah Journal for Engineering Sciences مجلة القادسية للعلوم الهندسية SN - 19984456 24117773 AB - The performance of asphalt concrete pavement depends on thebitumen properties, asphalt concrete mixtures volumetric properties andexternal factors such as traffic volume and environment.Overlay is one ofthe quickest preventive maintenance techniques that apply to retardasphalt pavement deterioration and prolonged service lives. This studyfocuses on prepare good performance and flexible modified thin hot mixasphalt used as an overlay. Styrene-butadiene rubber (SBR) at threecontents (3, 6 & 9 % by asphalt weight) were used either alone to modifylocal asphalt penetration grade 40/50. Properties of modified andunmodified asphalt binder (Penetration, Softening point, Flash point andDuctility) were examined. Performance of modified and unmodifiedasphalt mixtures was evaluated through Marshall, Indirect TensileStrength and Wheel Tracking Test. Test results showed that all propertiesof the base asphalt binder and asphalt mixes were improved by theaddition of the modifier. The best improvements in the modified bindersand modified mixes were obtained at 6% SBR. Stiffness of modifiedasphalt mixes were improved at 6% SBR was introduced. Marshallstability was increased by 26% and flow was decreased by 12.5% at 6%SBR. Resistant of the modified asphalt mixes to rutting was increased by61% at the same modifier content.The three mix types prepared and tested according to Marshall Method.Marshall Stability and Indirect tensile tests were conducted on Marshallspecimens. Wheel tracking test were conducted on (50×10×5 cm) ACmix beams.

ان اداء الطريق الاسفلتي يعتمد على خصائص الاسفلت، خصائص الخلطة الاسفلتية وعلىالعوامل الخارجية مثل الحجم المروري والظروف الجوية. طبقة الاكساء السطحية واحدة من اهمواسرع طرق الصيانة لمعالجة الطرق المتضررة لزيادة عمره الخدمي.هذه الدراسة تهدف الىاعداد خلطة اسفلتية عالية الاداء تستخدم في عملية الاكساء السطحية. استخدم ستايرين بيوتادين9 % من وزن الاسفلت المستخدم ( مع العلم ، 6 ، المطاط كمضاف للاسفلت بثلاثة نسب ) 304 . تم فحص خصائص الاسفلت والاسفلت المحسن / ان الاسفلت المستخدم ذو نفاذية 04باستخدام ستايرين بيوتادين المطاط والتي هي ) النفاذية ، درجة الليونة ، نقطة الوميض ،المطيلية (. وتم تقييم اداء الخلطة الاسفلتية والخلطة الاسفلتية المحسنة وذلك عن طريق فحصمارشال واجهاد الشد غير المباشر وفحص العجلة الدوارة. بينت نتائج الفحوصات ان استخدامستايرين بيوتادين المطاط كمضاف للاسفلت ادى الى تحسين اداء الاسفلت والخلطة الاسفلتية.وكذلك بينت هذه الفحوصات ان النسبة المثالية لهذا المضاف هي 6% التي اظهرت الصلابةالافضل للخلطات الاسفلتية. ان قوة ثبات مارشال ازدادت بنسبة 66 % والجريان قل بنسبة%56.0 عند استخدام 6% من المضاف وكذلك مقاومة الخلطات الاسفلتية للتخدد ازداد بنسبة%65 عند استخدام نفس النسبة من المضاف.تم اعتماد معدل ثلاث نماذج لخلطات مارشال اي عند استخدام فحصي مارشال وفحص اجهادالشد غير المباشر وتم استخدام عتبة من الخلطة الاسفلتية عند فحص العجلة الدوارة بابعاد 04 سمطول و 54 سم عرض و 0سم ارتفاع )سمك(. ER -