@Article{, title={EFFECT OF CARBON BLACK TYPE ON THE MECHANICAL BEHAVIOUR OF ELASTOMERIC MATERIAL UNDER DYNAMIC LOADING تأثير نوعية اسود الكاربون على التصرف الميكانيكي للمواد الايلاستومير تحت التحميل الحركي}, author={Asia Abdulsattar Al-Abadi اسيا عبد الستار العبادي and Dr. Mohsin Noori Hamzah الدكتور محسن نوري حمزة}, journal={Al-Qadisiyah Journal for Engineering Sciences مجلة القادسية للعلوم الهندسية}, volume={6}, number={3}, pages={268-286}, year={2013}, abstract={The mechanical behavior of filled elastomeric (rubber and rubber-like) materials is known to beincompressible, or nearly-incompressible, hyperelastic and time-dependent, or viscoelastic. Thiscomplex behavior of rubbery materials needs more understanding, and good knowledge is required forsuch behavior in order to achieve a good constitutive modeling for better design of a rubber componentfor a specific application. This work concentrated on studying the effect of carbon black type on themechanical properties of rubbery material characterization. To do this, different tests were performedon filled rubber with three different kinds of carbon black N326, N375, and N660. All tests wereperformed at room temperature. The tests include rheometer tests, hardness tests, tensile tests, specificgravity tests, compression tests, relaxation test, and cyclic loading tests. Tensile tests were done withdifferent strain rate, relaxation tests done under different mean strain.Tensile stress-stretch curves were generated from the test data at strain rate ranging from 10 to 500mm/min and several transitions associated with strain-induced crystallization were observed in allmaterials. The filled rubber became stiffer when the strain rate increased from 10-200 mm/min, andbecame more compliant when the strain rate increased from 200 to 500 mm/min.Hardness and specific gravity tests showed that rubber filled with carbon black N375 is harder andhas specific density more than other two types of filled rubber.The mechanical compression set tests, which performed on rubber with three kinds of carbon blackand found that compression set for rubber filled with carbon black N375 is more than the other twokinds of filled rubber.Relaxation stress-time curves were generated from test data at varying mean strain ranging (50% to200%) from the effective length of the specimen, at constant strain rate (200 mm/min). Generally, itwas observed that the stress reduces with time when the specimen hold at specific strain. This reductionis faster at strain between 50% and 100% than the strain between 150 to 200% till reaches steady state.Series of cyclic tension tests were carried out at room temperature on a rubber compound understrain rate 200 mm/min. All these cyclic strain-controlled experiments showed that the filled rubbermaterials, used in the present work are time-dependence with hysteresis. It came out that hysteresis forrubber with carbon black N375 is more than the rubber with other two kinds of carbon black

يعرف التصرف الميكانيكي للمواد الايلاستومير )المطاط و المواد المشابهة للمطاط( المدعمة على انه غير قابل للانظغاط او انهقريب من ذلك , شديد المطيليه ويعتمد على الوقت او انه مرن لزج . هذا التصرف المعقد للمواد المطاطية يتطلب فهم اكثر , ويتطلبمعرفة جيدة من اجل الوصول الى نمذجة جيدة لتصميم افضل لمركبات المطاط عند استخدامها في مجال معين . هذا العمل يركز علىدراسة تأثير نوع اسود الكاربون على خواص المواد التي توصف بانها مطاطية . لعمل هذا اختبارات مختلفة اجريت على المطاطجميع الاختبارات اجريت بدرجة حرارة الغرفة . الاختبارات . )N660,N326,N المدعم بثلاث انواع مختلفة من اسود الكاربون ) 375تضمنت , اختبار الريوميتر , اختبار الصلابة , اختبار الشد , اختبار الثقل النوعي , اختبار الانضغاطية , اختبار الاسترخاء ,اختبارات التحميل الدوري . اختبارات الشد اجريت تحت معدلات انفعال مختلفة , اختبارات الاسترخاء اجريت عند متوسط انفعالمختلف .011 ملم/دقيقة( تم توليد منحنيات الاجهاد-الاستطالة حيث - من بيانات اختبارات الشد عند معدلات انفعال مختلفة تتراوح بين ) 01لوحظ ولجميع المواد عدة انتقالات ترتبط مع )الانفعال يحث التبلور( . المطاط المدعم يصبح اصلب عندما يزداد معدل الانفعال من 01ال 011 ملم/دقيقة بينما يكون اكثر مطاوعة عند زيادة معدل الانفعال من 011 الى 011 ملم/دقيقة .اكثر صلابة وثقل نوعي من النوعين )N اظهرت اختبارات الصلابة والثقل النوعي ان المطاط المدعم باسود الكاربون ) 375الاخرين الاخرين من المطاط المدعم .من اختبارات الانضغاطية الميكانيكية التي اجريت للمطاط بثلاث انواع من اسود الكاربون اوجدت ان المطاط المدعم باسودله انضغاطية اعلى من النوعين الاخرين من المطاط المدعم . )N الكاربون ) 375من البيانات التي تم الحصول عليها من اختبارات الاسترخاء تم توليد منحنيات الاجهاد-الوقت عند مستويات انفعال متغيرة تتراوحبين 01 % الى 011 % من الطول الفعال للعينة وعند معدل انفعال ثابت هو 011 ملم/دقيقة . بصورة عامة لوحظ ان الاجهاد يتناقص معالزمن عند مسك العينة عند انفعال محدد . وهذا التناقص يكون اسرع عند انفعال يتراوح بين 01 % الى 011 % من الانفعال الذييحدث عند انفعال بين 001 % الى 011 % حتى الوصول الى حالة الاستقرار .سلسلة من اختبارات الشد الدوري اجريت بدرجة حرارة الغرفة على المطاط تحت معدل انفعال ) 011 ملم/دقيقة( . كل التجاربالتي تسيطر على الانفعال الدوري اظهرت ان المواد المطاطية المدعمة هي تعتمد على الوقت مع الهسترة . النتيجة كانت ان الهسترةكانت اكثر من النوعين الاخرين .} }