TY - JOUR ID - TI - Experimental Determination Of Elastic Constant Of Composite Materials Using Vibration Properties الحساب العملي لمعامل مرونة المواد المركبة باستخدام خواص الاهتزازات AU - Hameed Dwech Lafta حميد دويج لفتة PY - 2013 VL - 17 IS - 5 SP - 20 EP - 30 JO - Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة SN - 25200917 25200925 AB - In this study, a correlation between an approximate analysis of beam vibration problem and experimental measurements of vibration property was a achieved in an attempt to develop a simple and reliable experimental method for determining the elastic constant of materials as a non-destructive test. The analytical solution was based on Euler and Rayleigh beam models with simply supported boundary conditions, and the experimental work was based on the Dunkerly's approach. A development of an existing test setup was done to be more suitable for beam specimen of composite materials.The present experimental measurements of the elastic constant were compared with published results and it is found that the proposed experimental work is provided an acceptable and reliable measurements. The comparisons indicate errors in the measurements that are ranging between (3.1-12.7) % based on Euler model and (0.87-4.6) % based on Rayleigh model.Finally, a numerical solution of the problem based on the feedback of the present experimental results was developed using a computer package program called ANSYS. The numerical results reflected that the proposed experimental scheme is a simple, reliable and accurate one.

في هذا البحث تم إيجاد طريقة توافقية بين التحليل النظري التقريبي والقياس العملي لخواص الاهتزازات لغرض ايجاد طريقة عملية مبسطة ومعتمدة لغرض حساب معامل مرونة المواد المركبة كإحدى الطرق التي تسمى بالاختبار اللااتلافي. تم اعتماد طريقتي اويلر ورايلي لاشتقاق معادلات الاهتزاز الطولي لعينة عتبة مثبتة بطريقة التعليق الحر واعتماد طريقة دنكلريز لحسابات الجانب العملي. تم تطوير الجهاز ألمختبري ليكون أكثر ملائمة لعينات المواد المركبة. وقد أوضحت النتائج وجود تطابق في القياس النظري والعملي للعينات وبنسبة خطاء تتراوح بين (3.1-12.7 )% باعتماد طريق اويلر و (0.87-4.6 )% باعتماد طريقة رايلي. تم استخدام النتائج من الطريقة أعلاه كبيانات لبرنامج تم أعداه باستخدام برنامج حاسوبي يسمى (ANSYS) لغرض التحقق والمقارنة من نجاح الطريقة المقترحة والتي أكدت النتائج على أنها طريقة مبسطة ومعتمدة لحساب معامل مرونة المواد المركبة. ER -