TY - JOUR ID - TI - Study the Optimization Parameters for Spring Back Phenomena in U-Die Bending دراسة المتغيرات المثلى لظاهرة الرجوعية في عملية الحني U-die AU - Khalida K.Mansor AU - Aseel Hamad AU - Karem M.Younis PY - 2013 VL - 31 IS - 9 Part (A) Engineering SP - 1705 EP - 1718 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - The main objective of the research is to find the optimum parameters that reduce the springback by using the commercially [SPSS] program to analysis data and find the best parameters which given lowest springback in the U-die bending. A commercial aluminum alloy [AL-1050] sheet (0.9 mm) thickness that founded when punch speed increase the springback increase, when rolling direction angle is 90 Lower springback, and when increase the dwell time decrease the springback, and the value of parameters predicted from [SPSS] have lower springback and obtain a goal dimension for the products. And predict the springback value by especial equations which given correlation coefficient 95.4% between the observed value of the dependent variable and the predicted value.

الهدف الرئيسي لهذا البحث هو ايجاد العوامل المثلى التي تقلل الرجوعية باستخدام البرنامج (SPSS ) لتحليل البيانات وايجاد افضل المتغيرات والتي ستعطي اقل رجوعية في قالب الحني باستخدام صفيحة من الالمنيوم وبسمك (0.9) ملم حيث وجد انه بزيادة سرعة البنج تزداد قيمة الرجوعية وباقل قيمة للرجوعية باتجاه درفلة 90 وعند زيادة زمن الانتظار يقل مقدار قيمة الرجوعية وقيم المتغيرات المتوقعة في برنامجSPSS سيقلل من قيم الرجوعية وبالتالي سنحصل على الابعاد المرجوة من المنتج.يتم توقع قيم الرجوعية من خلال معادلة خاصة والتي اعطت معامل ترابط مقداره 95.4 % ما بين القيم المقاسة والقيم المتوقعة للمتغيرات المعتمدة. ER -