@Article{, title={Comparison Between Conventional Arrays in 2D Electrical Resistivity Imaging Technique for Shallow Subsurface Structure Detection of the University of Technology مقارنة بين المصفوفات التقليدية لتقنيات المقاومة النوعية الكهربائية ثنائية الابعاد لكشف المنشاءات التحت الارض الضحلة في الجامعة التكنولوجية}, author={Imzahim Abdul Kareem Alwan}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={31}, number={10 Part (A) Engineering}, pages={1817-1824}, year={2013}, abstract={The most common conventional arrays which are used in 2D electrical resistivity imaging techniques are Wenner array, dipole-dipole array and Wenner-Schlumberger array. These arrays have been tested in the University of Technology Camp / Iraq - Bagdad to find out the suitable array for type of subsurface structure of the study area. Borehole data near the study area have been used to qualify (confirm) the results. Six 2D images have been created (two images for each array) in this study. The length of each image is 60 m with depth between 8 to 12 m. The results show that Wenner-Schlumberger array is the most suitable array for the target area. Moreover, the subsurface of the study area is consisting of three types of soil (Silty clay, clay and sand).

ان المصفوفات (الترتيبات) الأكثر شيوعا المستخدمة في طريقة المقاومة النوعية الكهربائية ذات البعدين هي ترتيب دايبول - دايبول و ترتيب فنر شلمبرجير وترتيب فنر. هذه الترتيبات تم تجربتها في موقع الجامعة التكنلوجية/ العراق – بغداد ، من اجل إيجاد الترتيب الأكثر ملائمتا لنوع تركيب ما تحت سطح الأرض لمنطقة الدراسة. نتائج الحفر الاختبارية القريبة من منطقة الدراسة تم استخدامها لتأكيد نتائج هذا البحث. تم انشاء ستة صور ثنائة الابعاد (صورتين لكل مصفوفة). ان طول كل صورة هو 60 متر وبعمق يتراوح بين 8 الى 12 متر. النتائج أوضحت بان ترتيب فنر شلمبرجير هو الأكثر ملائمة لمنطقة الدراسة، بالإضافة الى ان طبقات الأرض لمنطقة الدراسة تتكون من ثلاثة أصناف من التربة (طين غريني ، طين و رمل ).} }