@Article{, title={Utilization of Cement Kiln Dust (CKD) as a Partial Replacement of Cement in Mortar and Concrete الاستفادة من غبار فرن السمنت (CKD) كبديل جزئي عن السمنت في المونة والخرسانة}, author={I. H. Hassan ابتسام حازم حسن and O. M. Abdul-Kareem عمر محمد عبد الكريم and Ahmed Yasin Shihab أحمد ياسين شهاب}, journal={AL-Rafidain Engineering Journal (AREJ) مجلة هندسة الرافدين}, volume={21}, number={6}, pages={72-87}, year={2013}, abstract={Abstract This research examines the potential of using cement kiln dust (CKD) as a blended cement material to study the effects of this partial replacement on the most important properties of cement paste, mortar and concrete. The levels of replacement of cement by an equal amount of the (CKD) dust were (5, 10, 15, 20, 25, 30)% by weight. A reference cement paste, mortar and concrete mix were also prepared for comparison. The tested properties included the initial setting time of each cement paste and the compressive and tensile strengths of mortars and concrete. Water curing was used for all specimens and the strength tests were carried out at (3, 7, 28) days. Results of experimental data reveal that (CKD) can be effectively used as a partial cement material. The initial setting time of the cement paste is decreased with the increase of (CKD) content due to the high amount of lime and alkalis in (CKD). Besides, the compressive and tensile strengths of the blended cement and concrete specimens were also found to be comparable to the strengths of the reference mixes at all levels of replacement. Generally, it was indicated that the compressive strength decreased with the increase of (CKD) content. The (10)% replacement level had the best results in the compressive strengths of mortars and concretes at all ages in comparison to the reference mixes, also this level of substitution had a significant effect on the tensile strength of the mortars and concretes at early ages. It was noted that (15)% (CKD) replacement maintained the higher tensile strength of mortars at (7, 28) days, whereas a (25)% (CKD) had a similar effect but at (3, 28) days. Keywords: Cement Kiln Dust (CKD), Partial Replacement, Utilization.

الخلاصةيتضمن هذا البحث دراسة إمكانية استخدام غبار فرن السمنت كمادة سمنتية ممزوجة لدراسة تأثير الاستبدال الجزئي لتلك المادة على أهم الخواص لعجينة السمنت، المونة والخلطة الخرسانية. إن مستوىات الاستبدال عن السمنت تتمثل بكمية مساوية من مسحوق غبار فرن السمنت والتي هي (5، 10، 15، 20، 25، 30)% بالوزن. وقد تم تحضير عجينة سمنتية، مونة وخلطة خرسانية مرجعية لغرض المقارنة. إن الخواص المفحوصة تشمل كل من زمن التماسك الابتدائي لكل عجينة سمنتية ومقاومتي الانضغاط والشد للمونة و الخرسانة. تمت معالجة جميع النماذج بالماء كما تم اجراء فحوصات المقاومة بأعمار (3، 7، 28) أيام. أظهرت النتائج العملية أن غبار فرن السمنت من الممكن أن يستخدم بفاعلية لإستبدال جزء من كمية السمنت، كما أن زمن التماسك الابتدائي يتناقص بزيادة محتوى غبار فرن السمنت بسبب المحتوى العالي من الجير والقلويات الموجودة في غبار فرن السمنت. الى جانب ذلك، فقد فحصت مقاومتا الانضغاط والشد لكل من المونة الممزوجة والنماذج الخرسانية، وقد تم مقارنتها مع مقاومات الخلطات المرجعية ولجميع مستويات الاستبدال. وقد وجد أن مقاومة الانضغاط تتناقص مع زيادة محتوى الغبار. إن مستوى الاستبدال (10)% أبدى أفضل نتائج بالنسبة لمقاومة الانضغاط لخلطات المونة والخرسانة ولجميع الاعمار وذلك بالمقارنة مع الخلطات المرجعية. كما أن تأثيره كان ملحوظاً بالنسبة لمقاومة الشد لخلطات المونة والخرسانة عند الاعمار المبكرة، و لوحظ أن مستوى إستبدال (15)% من غبار فرن السمنت أظهر مقاومة شد اعلى للمونة عند العمرين (7 و 28) يوماً، بينما مستوى (25)% من الغبار حقق تأثيراً مشابهاً للنماذج الخرسانية بعمر (3 و 28) يوماً.} }