TY - JOUR ID - TI - NONLINEAR ANALYSIS OF SIMPLY SUPPORTED COMPOSITE STEEL - CONCRETE BEAM التحليل اللاخطي لعتبة مركبة بسيطة الإسناد من الفولاذ – الخرسانة AU - Amer M. Ibrahim عامر محمد إبراهيم AU - Qussay W. Ahmed قصي وهاب احمد PY - 2013 VL - 6 IS - 3 SP - 107 EP - 126 JO - DIYALA JOURNAL OF ENGINEERING SCIENCES مجلة ديالى للعلوم الهندسية SN - 19998716 26166909 AB - This paper presents a nonlinear finite element computer program. ANSYS version 12.0 developed for the analysis of composite steel-concrete beam. A three-dimensional finite element (FE) model has been developed in this work. The analytical results of load-deflection response have been compared with available experimental tests. In general good agreement between the finite element solutions and experimental results have been obtained. Parametric studies have been carried out to investigate the effect of some important material and geometrical parameters. These parameters included the effect of shear connectors number, concrete grade, thickness to width ratio of concrete slab, the ultimate load for shear connector and effect of yield strength of Steel beam. It was found that, as the compressive strength of concrete increases from 20 MPa to 70 MPa the ultimate load increases by about 20% and also an increase in the thickness to width ratio (t/B) of concrete slab from 0.1 to 0.3 lead to increase in the ultimate load by about 43%.

هذا البحث يقدم برنامج التحليلاللاخطيباستخدامالعناصرالمحددةANSYS الإصدار12 والمطور لتحليل عتبة مركبة فولاذ-خرسانة. تناول هذا العمل نموذج لعنصر محدد ثلاثي الأبعاد. النتائج النظرية لتصرف الحمل-الاود قورنت مع الفحوص المختبرية المتوفرة. بصورة عامة تم الحصول على توافق جيد بين نتائج طريقة العناصر المحددة والنتائج المختبرية. إن دراسة المتغيرات قد نفذت لبحث تأثير بعض المتغيرات المادية والهندسية المهمة. هذه المتغيرات تضمنت تأثير عدد الروابط القصية , ومقاومة الانضغاط للكونكريت, نسبة سمك الى عرض البلاطة الخرسانية, الحمل الأقصى للروابط القصية وتأثير مقاومة الخضوع للعتب الحديدي. لقد وجد بان كلما زادت مقاومة الانضغاط للكونكريت من20 MPaإلى70 MPa فان الحمل الأقصى يزداد حوالي 20 % وكذلك بزيادة نسبة سمك الى عرض البلاطة الخرسانية (B/t) من 0.1إلى0.3 يودي إلى زيادة الحمل الأقصى بحوالي 43%. ER -