@Article{, title={EVALUATION OF LOCAL VOIDAGE IN TWO PHASE SYSTEM BY OPTICAL METHOD حساب نسبة الفراغ الموقعية في نظام ثنائي الطور بطريقة بصرية}, author={Ali Z. Asker علي زين العابدين عسكر}, journal={DIYALA JOURNAL OF ENGINEERING SCIENCES مجلة ديالى للعلوم الهندسية}, volume={6}, number={4}, pages={70-80}, year={2013}, abstract={One of the important characteristics in predicting the flow of two phases (gas and liquid) in the industrial equipment is the gas percentage in the liquid, which is called voidage. This characteristic can be measured by different methods; the optical method is one of them. In the present work, a He-Ne laser light is employed to measure the voidage. The measurement depends on the principle of laser light attenuation during its passage through a mixture of fluids, which is governed by Beer-Lambert law. The attenuated light is measured using silicon type detector and an oscilloscope with a plotter. The gas phase was air while the liquid phase was contaminated water situated in a vertical column. The experiments were done with different air flow rates in water (1, 2, 3, 4,5and 6 liters per minute) with two spot sizes of laser (5mm dia & 10 mm dia). The results illustrated the possibility of measuring the voidage using laser beam and are compared with another one based on the liquid level variation (level ratio) in the column. Furthermore, the results provide that the 10mm dia spot size of laser beam gives better results.

إن من احد الخصائص المهمة عند تنبؤ ودراسة الجريان ذو الطورين (الغاز والسائل) في المعدات الصناعية هي نسبة الغاز إلى السائل والمسمى بــنسبة الفراغ. ويمكن قياس هذا الخاصية بعدة طرق والطريقة البصرية هي إحدى هذه الطرق. في هذا البحث تم استخدام ليزر هيليوم – نيون لقياس نسبة الفراغ. حيث أن مبدأ القياس يعتمد على التوهين الحاصل في ضوء الليزر المار خلال خليط الموائع, والذي يعتمد على قانون بيير-لامبرت. ويتم قياس شدة الضوء الموهن باستخدام كاشف ضوئي سيليكوني وراسم الذبذبة (اوسيلوسكوب) وراسم مخططات. تم استخدام الهواء كطور غازي بينما الطور السائل كان ماء ملوث موضوع داخل حاوية عمودية الموضع. تم إجراء التجارب بمختلف معدلات جريان الهواء داخل السائل وكان 1 و2 و3 و4 و5 و6 لتر في الدقيقة مع بقعتي ليزر مختلفة الأقطار 5 و10 ملم. أظهرت النتائج إمكانية قياس نسبة الفراغ باستخدام حزمة الليزر وقورنت مع طريقة قياس أخرى تعتمد على تغير ارتفاع السائل داخل العمود الحاوي على الغاز والسائل وسميت بنسبة المستوى. هذا إلى جانب ملاحظة كون الليزر ذو القطر 10ملم أبدت نتائج أفضل من الـ 5ملم.} }