TY - JOUR ID - TI - Effect of Pickles on the Validity Period of Orthodentic Wires تأثير المخللات على فترة صلاحية أسلاك تقويم الأسنان AU - Muna Khudhair Abbass منى خضير عباس AU - . Mohammed Abdulateef Ahmed محمد عبد اللطيف أحمد PY - 2013 VL - 17 IS - 6 SP - 1 EP - 14 JO - Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة SN - 25200917 25200925 AB - The summery of this research is to determine the longest validity period of the orthodentic wires used in three corrosive media. The first was similar to human mouth such as corrosive medium (artificial saliva), human temperature, aeration and acidity (pH), in comparison with the second corrosive medium was Khelic acid solution (CH3COO) only at same temperature and aeration above. The final comparison with the third corrosive medium was mixture of artificial saliva with khelic acid solution at same human temperature and aeration too. This study was achieved by using corrosion system was locally designed and made according to modified American standard (ASTM G31) .The orthodentic wires in this research type (AISI 301). By using the Corrosion Penetration Rate formula (CPR), traditional mathematical methods after three corrosion tests mentioned for six months in sequent and by using microstructures of samples before and after those tests. It was found the longest validity period of orthodentic wires was in medium which similar to human mouth (65.324 yr.) then wires in khelic acid solution only at same human temperature and aeration (32.982 yr.), and shortest validity period of wires was in third medium (mixture of artificial saliva and khelic acid solution at same human temperature and aeration) (15.863 yr.).The longest validity period was in the first state because in which corrosion less (50%) than the second state and less (86%) than the third state.

يتلخص البحث بتحديد أطول فترة صلاحية لأسلاك تقويم الأسنان في ثلاثة أجواء أكالة ، الأول جو مماثل لفم الإنسان تقريبا" من حيث الوسط الأكال (اللعاب الصناعي) (Artificial Saliva) ودرجة الحرارة والحامضية والتهوية ، ومقارنتها بالأسلاك العاملة في محلول حامض ألخليك (CH3COO) فقط وبنفس التهوية و درجة الحرارة السابقة كجو أكال ثاني، ثم الأسلاك المتواجدة في اللعاب الصناعي ومضافا" له حامض ألخليك (CH3COO) كجو أكال ثالث وبدرجة حرارة جسم الأنسان وله نفس التهوية أيضا" . وتمت الدراسة باستخدام منظومة مصممة و مصنعة محليا" حسب المواصفة القياسية الأميركية المعدلة (ASTM G31) ، وأسلاك تقويم الأسنان المستخدمة من نوع الفولاذ المقاوم للصدأ الأوستنايتي (AISI 301) . وبعد إجراء اختبارات التآكل الثلاث أعلاه و لفترة زمنية مقدارها ستة أشهر متتالية وباستخدام قانون معدل تغلغل أومعدل نفاذ تنقر التآكل (Corrosion Penetration Rate (CPR )) وبالطرق الرياضية التقليدية ومن الصور المجهرية للعينات قبل وبعد حالات التآكل وجد بأن الأسلاك تكون بفترة صلاحية أطول عند جو مماثل لفم الأنسان (65.324 yr.) وتليها الأسلاك العاملة في حامض ألخليك فقط وبدرجة حرارة وتهوية مماثلة للفم (32.982 yr.) ثم تليها الأسلاك العاملة في اللعاب الصناعي مضافا" له حامض ألخليك عند درجة حرارة وتهوية مماثلة للفم(15.863 yr.). أي إن أطول فترة خدمة تكون في الحالة الأولى لأن تآكلها يقل بنسبة (50%) عن الحالة الثانية وبنسبة (86%) عن الحالة الثالثة.كلمات الدلالة : حامض الخليك ،تقويم الأسنان ، المواد البايولوجية،الفولاذ المقاوم للصدأ،الفولاذ الأوستنايتي ،اللعاب الصناعي. ER -