TY - JOUR ID - TI - Preparation of Schottky devices (Al-GaAs &Ni-GaAs) and study of some photoelectronic properties AU - Burak Yahya Kadem PY - 2014 VL - 22 IS - 2 SP - 873 EP - 884 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - Four samples of metal (n-type) semiconductor contact had been prepared as a form of Schottky contact, Aluminum and Nickel metals and semiconductor substrate GaAs (donor) where used. The Ohmic contact has been firstly made with thickness (500 nm) using Aluminum for two samples and Nickel for other two, four samples were collected. These samples were annealed under the temperature of (450 K) and pressure (10-4Torr) for (30 min.) to avoid the interfacial layers. Then Schottky contact where made using Aluminum twice and Nickel twice with (120 nm) thickness and then we annealed the samples under temperature (450 K) and pressure (10-4Torr) , the samples are as follows:(Al/GaAs/Al Ohmic, Al/GaAs/Ni Ohmic, Ni/GaAs/Al Ohmic , Ni/GaAs/Ni Ohmic). The photocurrent as a function of wavelength was calculated and it was found that the maximum value for the sample (Al/GaAs/Al Ohmic) in the wavelength (800 nm), the dark current is (1.9 x 10-9Ampere). The detector coefficients of the samples where calculated, the maximum Response at the wavelength (800 nm) was (0.157 Ampere/ Watt) and maximum Specific Directivity at the same wavelength is ( 63.7 x1011 Hz ½ Watt-1), the maximum Noise Equivalent Power is (0.157 Watt Hz -½ ) and the maximum Efficiency is (24.4 %) at the same wavelength, the photocurrent and Response values depended on the absorption coefficients of metals and work functions the samples operated within the area under the near- infrared .

تم تحضير اربع نماذج شوتكي باتصال معدن شبه موصل (مانح) على شكل تماس شوتكي حيث تم باستخدام معدني الالمنيوم والنيكل وارضيه شبه موصل ارسنيد الكاليوم (مانح), تم اولاً اجراء الاتصال الاومي بسمك (500 nm) باستخدام معدن الالمنيوم لنموذجين ومعدن النيكل لنموذجين فكانت المحصله اربع نماذج وتمت عمليه التلدين لهذه النماذج تحت درجه حرارة (450 كلفن) وضغط (10-4تور) لمدة نصف ساعه لتفادي حالات السطح البينيه ومن ثم اجراء اتصال شوتكي باستخدام معدن الالمنيوم مرتين والنيكل مرتين وبسمك (120 nm) ومن ثم اجراء عمليه التلدين الحراري تحت درجه (450 كلفن) وضغط (10-4تور) فكانت النماذج كالاتي: ( المنيوم- ارسنيد الكاليوم وبتماس اومي المنيوم, المنيوم- ارسنيد الكاليوم وبتماس اومي نيكل, نيكل - ارسنيد الكاليوم وبتماس اومي المنيوم , نيكل - ارسنيد الكاليوم وبتماس اومي نيكل) ومن ثم تم حساب قيم التيار الضوئي كداله للطول الموجي حيث كانت اعلى قيمه للتيار الضوئي عند الطول الموجي (800 nm) وكانت قيمه تيار الظلام ( 1.9 x 10-9امبير) ومن ثم حساب معاملات الكاشف للنماذج الاربعه, حيث تم حساب اعلى قيمه للاستجابه عند الطول الموجي (800 nm) وكانت (0.157 Amp./ Watt) واعلى قيمه للكشفيه النوعيه كانت عند نفس الطول الموجي (63.7 X1011 Hz1/2 Watt -1) في حين كانت اقل قدرة مكافئة للضوضاء هي (0.157 Watt Hz-1/2) واعلى كفاءه كميه مسجله هي ( 24.4%) وسجلت قيم التيار الضوئي والاستجابه اعتمادا على معامل امتصاص المعدن وداله شغله وكانت النماذج تعمل ضمن منطقه تحت الحمراء القريبه. ER -