@Article{, title={Effect of normal load and sliding velocity on the Wear rate of some polymer blends تأثير الحمل العمودي وسرعة الانزلاق على معدل البلى لبعض الخلائط البوليمرية}, author={Faik H. Anter فائق حماد عنتر and Ahmed H. Mahmood احمد حسن محمود}, journal={Tikrit Journal of Pure Science مجلة تكريت للعلوم الصرفة}, volume={18}, number={2}, pages={236-243}, year={2013}, abstract={The paper investigates experimentally the effect of normal load and sliding velocity on wear rate of some polymeric blends consists of Epoxy Resin (EP), unsaturated polyester (UP) and Poly Vinyl Chloride (PVC), prepared by Hand – lay up molding with different weight ratios, at room temperature . Experiments were carried out under normal loads (5,10,15,20) N and sliding velocity (3.14,3.92,4.71) m/sec before and after the immersion in (HCL) solution with normality (0.3 M) . Experimental results show that the wear rate increases with increasing normal load and sliding velocity for all samples before and after immersion in (HCL) solution (21) days. Also the results show that the wear rate for immersed samples in (HCL) solution higher than that of dry samples .

حقق البحث عملياً تأثير الحمل العمودي المسلط وسرعة الانزلاق على خواص البلى لخلائط بوليمرية ثنائية وثلاثية مؤلفة من راتنج الايبوكسي (EP) Epoxy والبولي استر غير المشبع Unsaturated Polyester (UP) والبولي فنيل كلورايد Poly vinyl chloride (PVC) والمحضرة بطريقة القولبة اليدوية بنسب وزنية مختلفة وبدرجة حرارة الغرفة . في هذا البحث تم تسليط احمال عمودية مقدارها (20,15,10,5) نيوتن وسرع انزلاق مختلفة هي (4.71,3.92,3.14) m/sec قبل وبعد الغمر في المحلول الحامضي وبعيارية (0.3M) . اوضحت النتائج العملية بأن معدل البلى يزداد مع زيادة الحمل المسلط ومع زيادة السرعة الانزلاقية لكافة العينات قبل وبعد الغمر في المحلول الحامضي لمدة (21) يوم . كما اوضحت النتائج العملية ايضاً بأن معدل البلى للعينات المغمورة في المحلول الحامضي هو اكبر مما للعينات الجافة .} }