TY - JOUR ID - TI - Study Coefficient of Discharge for a Combined Free Flow over Weir and under Gate for Multi Cases دراسة معامل التصريف لجريان حر مركب فوق هدار وتحت بوابة لعدة حالات AU - Anees Kadhum Idrees AL-Saadi PY - 2013 VL - 5 IS - 4 SP - 278 EP - 288 JO - Euphrates Journal of Agricultural Science مجلة الفرات للعلوم الزراعية SN - 20723857 AB - ABSTRACT : Weirs and gates are the common and important structures which are used in controlling and adjusting the flow in irrigation channel. One disadvantage of the gates is the possibilities of retaining the floating materials which can be resolved if they combined with the weirs. Also sedimentation problem in weir can be resolved by combination of weirs with sluice gates. These combined structures have a new hydraulic condition that is different with weir condition solely or we have only gate. This study was done in the fluid lab of civil engineering in Babylon University .This research presents the results of an experimental study on the hydraulic characteristics of weirs and combined weirs under multi cases, these cases were (rectangle weir, v-notch weir, semi-circular weir, rectangular combined weir with a rectangular gate, v-notch combined weir with a rectangular gate, semi-circular combined weir with a rectangular gate, and semi-circular combined weir with a semi-circular gate). The results showed that the experiments erected on the notches were obtained for discharge coefficient Cd as follows: Rectangular weir Cd = 0.607 , V_ notch Cd = 0.630 , Semicircular weir Cd = 0.693 , Combined V-notch weir and Rectangular gate Cd = 0.779 , Combined Rectangular weir and Rectangular gate Cd = 0.751 , Combined semicircular weir and Rectangular gate Cd = 0.781 and Combined semicircular weir and semicircular gate Cd = 0.797 . We found the values Cd in the Compound semicircular weir and semicircular gate are the best in terms of being a once hydraulic values Cd higher than the other notches.Keywords: Flow; Weirs; Gates; Hydraulic models.

الخلاصة :السدود والبوابات من المنشأت الهيدروليكيه المهمه التي تستخدم في مراقبة وضبط التصريف في قنوات الري. على الرغم من وجود عيب واحد في البوابات هو احتمال الإبقاء على المواد العائمة التي يمكن حلها إذا كانت مجتمعة جنبا إلى جنب مع السدود. وأيضا مشكلة الترسيب في الهدار يمكن حلها عن طريق الجمع بين السدود مع بوابات السد. هذه المنشأت مجتمعة تكون حالة هيدروليكية جديدة يختلف عن حالة هدار فقط أو بوابة فقط. ويقدم هذا البحث نتائج دراسة تجريبية على الخصائص الهيدروليكية للمياه مع السدود او السدود المركبة تحت حالات متعددة، وكانت هذه الحالات (الهدار المستطيل، الهدار المثلث، الهدار النصف دائري، هدار مثلث مركب مع بوابة مستطيلة, هدار مستطيل مركب مع بوابة مستطيلة ,هدار نصف دائري مركب مع بوابة مستطيلة, هدار نصف دائري مركب مع بوابة نصف دائرية.اجريت الدراسة والتجارب في مختبر كلية الهندسة قسم المدني في جامعة بابل. اظهرت النتائج التي تم الحصول عليها من اجراء التجارب التي اقيمت على الهدارات للخروج بقيم معامل التصريف Cd على النحو التالي: الهدار المستطيل Cd = ,0.607 الهدار المثلثة Cd = ,0.630الهدار النصف دائري Cd = ,0.693هدار مثلث مركب مع بوابة مستطيلة Cd = ,0.770هدار مستطيل مركب مع بوابة مستطيلة Cd = , 0.751هدار نصف دائري مركب مع بوابة مستطيلة Cd = ,0.781هدار نصف دائري مركب مع بوابة نصف دائرية Cd = 0.797 , ولمعرفة أفضل شكل من الناحيه الهيدروليكيه أخذ معامل التصريف (Cd) كدالة على ذلك. من اعلاه نلاحظ ان قيمة Cd للهدار النصف الدائري المركب مع بوابة نصف دائرية هو الافضل . ER -