TY - JOUR ID - TI - Sacrificial Anode Cathodic Protection Remote Monitoring And Control Using Labview And Micaz Motes مراقبة والسيطرة عن بعد بأستخدام منظومة الحمايه الكاثودية و اجهزة MicaZ Motes وبرنامج لاب فيو AU - mohammed zeki Al-faiz محمد زكي الفائز AU - Liqaa saadi mezher لقاء سعدي مزهر PY - 2014 VL - 18 IS - 1 SP - 33 EP - 45 JO - Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة SN - 25200917 25200925 AB - The Cathodic Protection system (CP) is used for the monitoring system of oil pipeline via Wireless Sensor devices to prevent corrosion. In this paper the use of Sacrificial Anode Cathodic Protection (SACP) system was presented and how they can be developed to prevent the corrosion. The aim of developing a CP system is to provide control over oil pipelines and to reduce the incidence of corrosion. The proposed system integrates the technology of Wireless Sensor Network (WSN) in order to collect potential data and to realize remote data transmission. Three cases had been studied, the first case is a normal situation when there is not find any problem in oil pipeline, the second case is in the event of a malfunction in the values of voltage by a simple increase or decrease in this case possible controller by the observer in the remote control room. The third case is in the event of a serious defect in the pipe and be output either smuggling operation or malfunction in the anode. Each one of the three studies cases use nine Wireless Sensors (WS's), three Remot Terminal Units (RTU's) and one Base Station (BS). LabVIEW 2010 program was used as the tool to build the simulation environment. Two algorithms are proposed of WSN, the first algorithm apply of WS's side while the second algorithm apply of BS side. The simulation results of this technique with the proposed show that it has least time delay, high speed, low power, and the find corrected location of the WS determined.

منظومة الحماية الكاثودية (CP) أستخدمت لمراقبة خطوط انابيب النفط عن طريق أجهزة المتحسسات اللاسلكية لمنع التآكل. في هذا البحث ,تم استخدام نوع منظومة الحماية الكاثودية الكلفانية (SACP) وتبيان كيف يمكن تطويرها لمنع التآكل. والهدف من تطوير نظام الحماية الكاثودية هو توفير السيطرة على خطوط أنابيب النفط والحد من حدوث التآكل. النظام المقترح هو دمج تكنولوجيا شبكة المتحسسات اللاسلكية (WSN) مع منظومة الحماية الكاثودية من أجل جمع البيانات المحتملة وتحقيق نقل البيانات عن بعد. درست ثلاث حالات، الحالة الأولى هو الوضع الطبيعي عندما لا يكون هناك أي مشكلة في خط أنابيب النفط، والحالة الثانية هي في حالة وجود خلل في قيم الجهد عن طريق زيادة أو نقصان بسيط, في هذه الحالة يمكن التحكم بواسطة المراقب في غرفة التحكم عن بعد. الحالة الثالثة هي في حالة وجود خلل خطير في أنابيب خطوط النفط ويكون الناتج إما عن عملية تهريب أو عطل في الأنود. في كل الدراسات الثلاثة تم استخدام تسعة أجهزة من المتحسسات اللاسلكية (WS) وثلاث وحدات للمحطة الطرفية (RTU) ومحطة رئيسية واحدة (BS). و تم استخدام محاكاة لاب فيو الاصدار 2010 بوصفها أداة لبناء بيئة المحاكاة. تم أقتراح خوارزميتان في WSN، الخوارزمية ألاولى تم تطبيقها في جانب WS والخوارزمية الثانية تم تطبيقها في جانب ال BS. وكانت نتائج المحاكاة لهذه التقنية مع الخوارزميات المقترحة بأن لديها أقل وقت تأخير، وسرعة عالية لايصال البيانات، وأقل طاقة، وتحديد الموقع الصحيح للجهاز اللاسلكي ومكان حدوث التأكل في الانبوب. ER -