TY - JOUR ID - TI - Estimation of Cutting Tool Wear in Turning using Taguchi Method Depending on Weight of the Removed Tool Metal تخمین تآكل عدة القطع في عملیة الخراطة بتطبیق طریقة تاكوجي اعتمادا على الوزن المفقود من العدة AU - Hussam Lefta Alwan AU - Baraa M.H. Albaghdadi AU - Mohanned M. H. AL-Khafaji AU - Asaad Ali Abbas PY - 2014 VL - 32 IS - 1 Part (A) Engineering SP - 24 EP - 33 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - This paper focuses on using Taguchi method to determine the optimumturning parameters such as spindle speed, depth of cut, and feed rate, denoted by factor symbols A, B, and C respectively. The effect of cutting parameters on tool wear is depended on the concept of removed weight from the tool metal during machining. The material that has been used as a workpiece is high carbon steel and carbide insert DNMG 443-15 as a cutting tool. Taguchi orthogonal array L9,quality characteristic "smaller is better", and ANOVA were used to achieve the goal of the research. The results obtained showed that spindle speed is thesignificant factor of the process followed by the feed rate in terms of their contribution in analysis. The optimum combination of parameters, which was found by applying Taguchi method, is that designated by A2B1C1.

ER -