@Article{, title={DESIGN OF GEOSYNTHETIC REINFORCED WALLS AND SLOPS BY TERRAM PROGRAM تصميم جدران ومنحدرات ترابية مسلحة بمادة Geosynthetic باستخدام برنامج TERRAM}, author={Suhad Abdulsattar Hasan سهاد عبد الستار حسن}, journal={KUFA JOURNAL OF ENGINEERING مجلة الكوفة الهندسية}, volume={5}, number={1}, pages={13-32}, year={2013}, abstract={This research deals with the design of geosynthetic reinforced walls and slopes subjected to series of static compressive loading tests by the present TERRAM program. The objectives of this study are suggesting an optimum geometry of reinforcement placement to lessen the width of the side slope of slopes.The effects of the following variables were taken into account: the angles of slope, wall or slope height, surcharge, strength parameters (cohesion and friction angle) and unit weight for all soils involved in the problem (fill, natural soil and foundation soil), friction angle for reinforcement-soil and fill-foundation interfaces, as well as internal and external factors of safety are calculated for different distributions of tensile force in the reinforcement layers according to the different arrangements of reinforcement layers in terms of number, length, and spacing.

هذا البحث يتناول تصميم الجدران والمنحدرات المسلحة بمادة geosynthetic والمعرضة لسلسلة من الاحمال الثابتة باستخدام برنامج. TERRAM ألهدف من هذه الدراسة هو اقتراح التصميم الامثل للجدران والمنحدرات الترابية بتحديد مواضع طبقات التسليح التي تساهم في تقليل من العرض الجانبي للمنحدر. تمت دراسة تأثير المتغيرات التالية على التصميم : زاوية ميل المنحدر, ارتفاع المنحدر, مقدارا لحمل الخارجي, معاملات تحمل التربه (التماسك وزاوية الاحتكاك الداخلي) والكثافة الوزنيه لجميع انواع الترب المستخدمه في التصميم (كتربة الملء والتربة الطبيعية وتربة الأساس ( اضافة الى زاوية الاحتكاك الداخلي للسطح الفاصل بين التربه المسلحه وتربة الاساس، فضلا عن حساب معاملات الامان المختلفة كمعامل الامان الداخلي والخارجي لمختلف توزيعات قوى الشد لطبقات التربه المسلحه بحسب اختلاف ترتيب طبقات التسليح من حيث الطول، العدد، والتباعد بينها.} }