TY - JOUR ID - TI - THE EFFECT 0F HEAT TREATMENTS, POLYMER QUENCHING AND ADDITIONS (Zr AND Ag) ON MECHANICAL PROPERTIES OF (6061) ALUMINUM ALLOY تأثير المعاملات الحرارية, الإخماد بالبوليمير والمضافات (Zr, Ag) على الخواص الميكانيكية لسبيكة الألمنيوم (6061) AU - Dr. Jassim Mohammed Salman Al-Murshdy Mr. Haydar Swary Rahi Al-Garawi PY - 2014 VL - 14 IS - 1 SP - 153 EP - 173 JO - Iraqi journal of mechanical and material engineering المجلة العراقية للهندسة الميكانيكية وهندسة المواد SN - 20761819 AB - Aluminum alloys (6XXX series) are widely used in the structural components of automotive and construction industries as they show a good combination of formability, corrosion resistance, weldability, and final mechanical properties. The objective of this work was to introduce improve properties of 6061-T6 aluminum alloys such as impact energy, thermal age hardening behavior, thermal stability and corrosion resistance in 3.5%NaCl solution by using quenching in 35% polyethylene glycol and addition alloying elements, i.e. Zr with Ag together to this alloy. And to determine the effects of artificial ageing on the properties. The precipitation hardening usually undergoes a thermal treatments, which consists of a solution heat treatment (530ºC for 1 hour) this temperature was selected among three temperatures that used to solid solution treatment, quenching (in water, in 35% PAG polymer solution) and artificial ageing. The experimental study is focused on artificial ageing upon that the temperatures is varying from 160ºC - 180ºC - 200ºC at different periods of time. Several tests were carried out to evaluate the performance of alloys before and after ageing, such as Vickers hardness, impact, thermal stability(DSC), metallographic examination, corrosion resistance in 3.5%NaCl solution and X-Ray diffraction (XRD).Results showed that the hardness of the base alloy(A) as homogenized was 48.7(kg/ ) whereas to alloy with additions from (Zr and Ag)(B) alloy was 50.7,the hardness at solid solution treatment was in alloy that quenched in water higher than these quenched in polymerAddition of 0.03% Zr with 0.18% Ag to the base alloy improves thermal age hardening behavior by (17.3%) when quenching in water, and by (17.1%) when quenching in 35%PAG at ageing temperature 180 in comparison to the base alloy.The addition of 0.03% Zr with 0.18% Ag together to base alloy improves impact energy by (25%) when quenching in 35%PAG corresponding to the base alloy when aging at 180 ºCFrom DSC curves could conclude the alloys that quenched in polymer solution have been higher thermal stability than these quenched in water.An improvement of corrosion resistance in 3.5% NaCl solution when the alloys quenched in polymer solution have been higher corrosion resistance than these quenched in water at aging temperature 180ºC.

تستخدم سبائك الألمنيوم ذات السلسلة 6XXX بصورة واسعة في تراكيب الهياكل للسيارات والصناعات الإنشائية كما توفر قابلية تشكيل و مقاومة تآكل جيدة وقابلية لحام جيدة وتحسن في الخواص الميكانيكية. الهدف من هذا البحث هو تحسين الخواص لسبائك الألمنيوم 6061-T6 مثل متانة الصدم, سلوك الإصلاد بالتعتيق الحراري, الأستقرارية الحرارية ومقاومة التآكل في محلول 3.5% NaCl باستخدام الإخماد في محلول البوليمير بنسبة 35% PAGوأضافة عناصر سبك مثلZrمع Agمعاً لهذه السبيكة. ولإيجاد تأثيرات التعتيق الاصطناعي على الخواص. الإصلاد بالترسيب عادةً يخضع لمعاملات حرارية, التي تتكون من المعاملة الحرارية المحلولية 530ºC)) لمدة ساعة واحدة اختيرت هذه الدرجة الحرارية من بين ثلاثة درجات حرارية التي استخدمت للمعاملة الحرارية المحلوليه, الأخماد (في الماء, في محلول البوليمير بنسبة 35% PAG ) والتعتيق الاصطناعي. أما التعتيق الاصطناعي فقد أجري في درجات حرارية تتفاوت من ( 160ºC - 180ºC - 200ºC) عند فترات زمنيه مختلفة. أجريت عدت اختبارات لتقييم الأداء للسبائك قبل وبعد التعتيق, مثل صلادة فكرز, الصدمة, الأستقرارية الحرارية (DSC), فحص البنية المجهرية, مقاومة التآكل في محلول (3.5% NaCl) وحيود الأشعة السينية (XRD).بينت النتائج ان صلادة السبيكة الأساس(A) عند المجانسة كانت 48.7(kg/ ) بينما للسبيكة مع مضافات منZrمع Ag كانت 50.7, الصلادة عند المعاملة المحلوليةكانت أعلى في السبيكة التي أخمدة في الماء منها في البوليمير وأضافة0.03% Zr مع 0.18% Ag للسبيكة الأساس تحسن سلوك الأصلاد بالأزمان الحراري بنسبة (17.3%) عند الأخماد بالماء, وبنسبة (17.1%) عند الأخماد في محلول البوليمير (35% PAG) بعد أجراء التعتيق عند درجة حرارة 180 بالمقارنة مع السبيكة الأساس.أما الإضافة 0.03% Zr مع 0.18% Ag للسبيكة الأساس فهي تحسن متانة الصدم بنسبة (25%) عند الأخماد في محلول البوليمير (35% PAG) بالمقارنة مع السبيكة الأساس عند أجراء التعتيق عند درجة حرارة 180 .من خلال منحنيات DSCيمكن استنتاج أن السبائك التي أخمدت بمحلول البوليمير تمتلك أستقرارية حرارية أعلى من تلك التي أخمدت بالماء.مقاومة التآكل تحسنت هي ألأخرى في محلول 3.5% NaCl, عندما أخمدت السبائك بمحلول البوليمير وامتلكت مقاومة تآكل أعلى من تلك التي أخمدت بالماء. ER -