TY - JOUR ID - TI - Study on Bond Strength of Bonded Gray Cast Iron AU - Awfa Abdul-Rassol Abdullah AU - Rasha Rahman Rawhdan PY - 2014 VL - 17 IS - 2 SP - 94 EP - 100 JO - Al-Nahrain Journal of Science مجلة النهرين للعلوم SN - 26635453 26635461 AB - In the present study, two gray cast iron specimens were diffusion bonded at the temperatures of 700, 750, 800, 850, and 900 °C, the furnace used atmosphericexperiment under a pressing load of 1 and 2 ton for 15, 30 and 60min. After diffusion bonding, shear test measurements of interface region were made. As a result, from the microstructural observations, a good bonding along the interface of the bonded couples were detected since the interface is free from voids and microcracks. To evaluate the bond strength, the shear test investigation was used. The actual bonded area was calculated by using a computer package called (Auto Cad 2006). The results shows that the bond strength increases with increasing the temperature and holding time. Fracturography of the interface was carried out by using optical microscope before and after the experiments. The microstructure results shows the formation of carbide. Its precipitation increases with increasing the bonding temperature and time.

يتضمن البحث دراسة الربط الانتشاري لحديد الزهر الرمادي بالظروف الجوية باستخدام طرق تسخن مختلفة 900,850,800,750,700°م، وباستخـدام قـوة كبـس2,1 طن بأزمان مختلفة 60,30,15 دقيقة لإيجاد الظروف العملية المناسبه التي تؤثر على متانة الربط. قيمت متانة الربط باستخدام فحص القص وأظهرت النتائج إن متانة الربط تزداد مع ازدياد درجات الحرارة وكذلك متانةالربـط تـزداد مع ازدياد الوقـت. استخدم برنامج(Auto Cad 2006) لحساب مساحه التماس. لوحظ عند استخدام غاز الاركون انه لم تتكون وصله ربط بسبب الاكسده. بعد استبيان النتائج التي تم الحصول عليها من الدراسة ألمختبريه تبين إن الوصلات المربوطة وجدت مقاومة قص قصوى تساوي 155.7 ميكاباسكال عند ربطها في درجه حرارة 900°م تحت قوة كبس 1 طن ولفترة تسخين 30 دقيقة. وتبين من اختبارات الفحص المجهري تكون أطواركاربيدية (Carbides) وترسيبها على سطح العينة وداخل السطح البيني. ER -