@Article{, title={The Effect of PVP Addition on the Mechanical Properties Of [84%LLDPE: 15 %(( 100- X) %PP: X%PVP):1%Basalt Particle] Polymer Blend Composites. دراسة تأثير أضافة (PVP) على الخواص الميكانيكيه للخليط البوليمري المتراكب: [84%LLDPE:15%((100-X)%PP:X%PVP):1%basalt particle]}, author={Teeb A. Mohammed and Akram R. Jabur and Sihama E. salih}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={32}, number={3 Part (A) Engineering}, pages={573-585}, year={2014}, abstract={Polymer blends composites were prepared according to the formula [84%LLDPE:15%((100-X)%PP:X%PVP):1%B.P] with weight ratios selected for X values (0,4,8,12,16 %), as strips by double screw extruder and use press process the strips to prepare the samples according ASTM specification, the mechanical properties were studied for all theprepared samples which are (tensile, flexural, compression, impact, hardness, and creep tests). The results are as following:- results showed increment of mechanical properties as PVP ratio increases except elongation, furthermore the results recorded highest values of fracture strength, young modulus, compressive strength, flexural strength, maximum shear stress, flexural modulus and creep modulus at PVP 8% wt. which are (31.32MPa, 0.14GPa, 27.4MPa,24MPa, 0.6MPa, 1.08GPa and 0.558GPa) respectively.While the highest values of fracture toughness and hardness recorded at 12% wt. (1.4696Pa√m), and at 4% wt. (56.5) respectively.

حضرت المتراكبات ذات أساس الخليط البوليمري الثلاثي, وفق الصيغة [84%LLDPE:15%((100-X)%PP:X%PVP):1%B.P] وبنسب وزنية مختارة لقيم x 16,12 ,8 ,4 ,0) %). وقد تم تحضيرها بشكل شرائط حضرت بعملية البثق بواسطة باثقة ثنائية اللولب واستخدمت عملية كبس الاشرطة لتحضير العينات وفق المواصفة القياسية (ASTM) , درست الفحوصات الميكانيكية للعينات المحضرة والمتمثلة ( فحص الشد والانحناء والانضغاط والصدمة والصلادة والزحف) أظهرت النتائج زيادة في الخصائص الميكانيكية مع زيادة نسبة PVP باستثناء المطيلية وعلاوة على ذلك سجلت النتائج أعلى قيم لمقاومة الشد, معامل الرونة, مقاومة الانضغاط ومقاوة الانحناء واعلى أجهاد قص ومعامل مرونة الانحناء ومعامل الزحف عند نسبة (8% wt) PVPوهي على الترتيب (31.32MPa , 0.14GPa , 0.6MPa , 27.4MPa , ( 0.558GPa , 1.08Gpaفي حين سجلت أعلى قيم لمتانة الصدمة وقيم الصلادة عند نسبةPVP 12% wt.)) (1.696 Pa√m) و 4%wt ((56.5 على الترتيب .} }