@Article{, title={Modeling of Arc Metal Welding Process of Low Carbon Steel (304) نمذجة طريقة لحام القوس المعدني للفولاذ المنخفض الكاربون نوع (304)}, author={Majid Hameed Abdul Majeed}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={32}, number={3 Part (A) Engineering}, pages={643-652}, year={2014}, abstract={This work includes an investigation of the effect and optimization of welding parameters on the tensile strength in the arc metal welding process. The experimental studies were conducted under varying welding currents, wire diameters, and heat input. The settings of welding parameters were determined by using the Taguchi experimental design method. The level of importance of the welding parameters on the tensile strength is determined by using analysis of variance (ANOVA). The optimum welding parameter combination was obtained by using the analysis of signal-to-noise (S/N) ratio. The tensile strength model was formulated based on Analysis of Variance (ANOVA) using Minitab® statistical package. The experimental results confirmed the validity of the used Taguchi method for enhancing the welding performance and optimizing the welding parameters in the arc metal welding process.

يتضمن هذا البحث دراسة تاثير عوامل لحام القوس المعدني على مقاومة الشد للفولاذ (304) بالاضافة الى ايجاد العوامل المثلى , وتم اجراء الدراسات التجريبية تحت تاثير التغير في قيم تيار اللحام , قطر السلك , بالاضافة الى الدخل الحراري. اما اعداد معاملات اللحام فقد تم تحديدها وفقا لطريقة تاكوجي(اي تصميم التجارب وفقا لطريقة تاكوجي). اما مستوى تاثير هذه المعاملات فقد تم تحديده وفقا لتحليل التباينANOVA . كما تم الحصول على عوامل اللحام المثلى باستخدام تحليل نسبة الاشارة/الضوضاء S/N, اما الموديل الرياضي لمقاومة الشد فقد تم نمذجتة وفقا لتحليل التباين باستخدام الحزمة الاحصائية لبرنامج MINITAB, واظهرت النتائج التجريبية صحة استخدام طريقة تاكوجي لرفع اداء اللحام وتحديد العوامل المثلى لطريقة لحام القوس المعدني للفولاذ نوع304.} }