TY - JOUR ID - TI - A modeling comparison studies for thermo-mechanical and other Properties of RHDPE and RLDPE Wastes نمذجة دراسات مقارنة للخصائص الثرمو- ميكانيكية وخصائص اخرى للبولي اثليين عالي وواطيء الكثافة المعاد AU - Falak O. Abas AU - Raghad U.Abass AU - Mohammed O.Abass PY - 2014 VL - 32 IS - 3 Part (A) Engineering SP - 681 EP - 701 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - A recycled waste plastic (recycled high density poly ethylene RHDPE and recycled low density poly ethylene RLDPE) are exposed to environmental conditions during the usage for many years ago. Also the chemical contaminants in the internal composition had effects on the thermo-mechanical and other properties for these wastes.Then weathering effect data are examine for both locally and international wastes on their thermo-mechanical and chemical properties such as (Tensile strength, modulus, elongation, impact and permeability) respectively.Afterward different mathematical software models are applied to analysis these weathering – properties data in order to estimate the more effective properties that changed by these weathering conditions such as (concentration of contaminant, time, temperature, thickness of specimen, length of spectra, basic property).The results shows that a multi-polynomial model has a best fit for most or several of properties to active weathering variables, also gave a vary residual and deviation than experimental analyzed data for both sources of wastes local and international RHDPE and RLDPE. Also results of thermo-mechanical and chemical properties prove that both tensile strength and modulus of elasticity thermo-mechanical properties and permeability / length of spectra chemical property were given a high quality of correction and fitting factor from 93-99 %, with less deviation and residual function was produced. And analyzed weathering properties of RHDPE gave a best fit than RLDPE; all of them fitted the mathematical software model below: …(1) Where:a, b, c …J = coefficient of the best fit model.x1 = concentration of contaminants.x2 = time of aging.

أن المواد البلاستيكية المعادة تتعرض للتغيرات الجوية المحيطة بها نتيجة الاستخدام لعدة سنوات. بالأضافة الى تأثير الشوائب الكيمياوية نتيجة معاملتها إثناء عمليات التصنيع والصب وخصوصاً على الخصائص الثرمو-ميكانيكية والخصائص الأخرى.لذلك تم تفحص العديد من البيانات حول تأثير ظروف التجويه لنماذج محلية وعالمية لمواد معادة على خصائصئها الثرموميكانيكة والكيمياوية مثل (قوة الشد، معامل المرونة، الأستطالة، قوة الصدمة،والنفاذية)على التوالي.فيما بعد تم تطبيق مختلف الموديلات الرياضية الالكترونية لتحليل تلك البيانات (ظروف التجوية) لتحديد اكثر هذه الخصائص تاثرا اي تغيرا مع تلك الظروف (ظروف التجوية مثل تركيز الشوائب، زمن التعرض للظروف البيئية القاسية، درجة الحرارة، سمك العينة او الشريحة، الطول الموجي للأشعة المطبقة، الخاصية الاساسية).وأثبتت النتائج الرياضية التحليلية بواسطة الحاسوب انطباق الموديل المتعدد الدوال على اغلب الخصائص المقاسة / متغيرات ظروف التجوية المطبقة حيث اعطى هذا الموديل النتائج اقل انحرافاً للقيم العملية عن النظرية وانطباقاً اكثر بين النوعين من البلاستيك المعاد المحلي والعالمي الواطئ والعالي الكثافة.واكدت نتائج كل من الخصائص الثرمو-ميكانيكية والكيمياوية انطباقاً اكثر لخاصتي الشد والمرونة والخاصية الكيمياوية وهي علاقة النفاذية / الطول الموجي للاشعة الجوية حيث اعطت معامل تصحيح عالي النوعية واقل انحرافاً من 93-99 %.اضافة الى ذلك علاقة الخصائص الثرمو-ميكانيكية والكيمياوية للبولي اثيلين عالي الكثافة (PETH) كانت اكثر انطباقاً من النوع الأخر من المعاد البولي اثيلين الواطئ الكثافة(PETL) واعطى الكل انطباقاً للموديل الرياضي التالي: ..(1) ER -