@Article{, title={أستخدام كاربونات الكالسيوم الصوديوم في انتاج مخاريط عالية الحرارة}, author={سلام احمد حمزة and محمد حمزة المعموري and عبد الحميد فاضل البياتي}, journal={Journal of University of Babylon مجلة جامعة بابل}, volume={22}, number={5}, pages={1165-1178}, year={2014}, abstract={This study included the possibility of using Kaolin Duekhla and sand Ardma as materials in the production of local thermal cones with the addition of other materials such as sodium carbonate and calcium carbonate, red lead oxide, potassium feldspar, borax and fled in different proportions as material help smelting.Chemical analysis was to sand Erdma and Kaolin Duekhla to prove disqualified for work. Models have been formed through the stone cast and after mixing materials in a dry water was added to it to facilitate manual stamping CBS models were then drying models degree oven 120c. Program was burning in the oven at a rate of 300c per hour. Was prepared nine models change ratios of sodium carbonate and calcium carbonate for the difference in the degree of bending.The results of the fusion behavior of calcium carbonate are extrusive nonlinear Unlike Sodium Carbonate, which is in reverse, with the higher percentage of carbonate, sodium told temperature, and vice versa, either (density) rises with increasing temperature extrusive nonlinear unlike (porosity) drops with increasing temperature incineration Lama (hardness) and (compressibility) with a gradual increase in the temperature rise

تضمنت هذه الدراسة امكانية استخدام كاؤلين دويخلة ورمل ارضمة بوصفها مواد اولية محلية في انتاج مخاريط حرارية مع إضافة مواد أخرى مثل كاربونات الصوديوم وكاربونات الكالسيوم, اوكسيد الرصاص الاحمر,فلسبار بوتاسيوم, والبوراكس فرت بنسب مختلفة كمواد مساعدة على الصهر . تم التحليل الكيميائي لرمل أرضمة و كاؤلين دويخلة لاثبات صلاحيتهما للعمل. تم تشكيل النماذج من خلال قالب جبسي وبعد خلط المواد بشكل جاف تمت إضافة الماء اليها لتسهيل كبس النماذج بالكبس اليدوي ثم تم تجفيف النماذج بالفرن بدرجة 120c . برنامج الحرق في الفرن كان بمعدل 300c لكل ساعة .تم نحضير تسعة نماذج بتغير نسب كاربونات الصوديوم وكاربونات الكالسيوم للحصول على فارق في درجات الانحناء.وبينت نتائج الانصهارية سلوك كاربونات الكالسيوم بشكل طردي لاخطي بعكس كاربونات الصوديوم التي هي بشكل عكسي اذ كلما ارتفعت نسبة كاربونات الصوديوم قلت درجة الحرارة والعكس صحيح,اما (الكثافة) فترتفع مع زيادة درجة الحرارة بشكل طردي لاخطي بعكس (المسامية) فتنخفض مع زيادة درجة حرارة الحرق اما (الصلادة) و(الانضغاطية) فزيادة تدريجية مع ارتفاع درجة الحرارة .} }