TY - JOUR ID - TI - Preparation and study Impact and Hardness Strength for Gravel Nano Particles /Polyester Composites تحضير ودراسة مقاومتي الصدمة والصلادة لمتراكبات (البولي استر/مسحوق الحصى) النانوية AU - Abbas Fadhil Essa عباس فاضل عيسى AU - Ahmed Jadah احمد جداح فرحان AU - Najlaa Jerjack نجلاء جرجاك عبدالله PY - 2013 VL - 4 IS - 4 SP - 40 EP - 45 JO - University of Thi-Qar Journal of Science مجلة علوم ذي قار SN - 19918690 27090256 AB - In view of the developments of industrial applications, this happened in recent years and the need to use composite materials in general and polymer composite especially in the various industrial applications developed. This work focuses on studying the addition effect of the prepared gravel nanoparticles (different types) with particles size of (121.74 nm) for type( Ι ) and (100.16 nm)for type( ΙI ) as a nano particles with different weight percentages (10, 20, 30, 40) % to the unsaturated polyester resin (UPE) as a matrix to prepare polyester nanocomposites . The molding method was used to prepare polyester and their nanocomposites sheets.The mechanical properties were studied including Impact strength and Hardness strength for the samples. The results showed that the samples of Gravel nanocomposite type ( Ι ) gained highest values of Impact strength (4.508 KJ/m2 ) at ratio percents (40%) and the samples of Gravel nanocomposite type (IΙ ) gained highest values of Impact strength (5.509 KJ/m2) at ratio percents (40%). Also the results show that the UPE / Gravel nanocomposite type (IΙ ) gained highest values of Impact strength (5.509 KJ/m2) at ratio percents (40%) compared with UPE / Gravel nanocomposite type ( Ι ) (4.508 KJ/m2 ). Also the results showed that the samples of Gravel nanocomposite type (Ι) gained highest values of shore D number (91.65 H.NO.) at weight percentage (40%) of Gravel nano particales. While the samples of Gravel nanocomposite type (IΙ) gained highest values of shore D number (90.00 H.NO.) at weight Percentages (10%, 20%).

نظرا للتطورات في التطبيقات الصناعية التي حصلت في السنوات الأخيرة والحاجة الى استخدام المواد المتراكبة بشكل عام والمتراكبة الوليمرية بشكل خاص في مختلف التطبيقات الصناعية المتقدمة. في هذه الدراسة تحضير عينات من متراكبات نانوية من راتنج البولي استر مضاف اليه نوعين مختلفين من مسحوق الحصى بحجم حبيبي (121.74 nm) للنوع الاولI) ) و (100.16 nm) للنوع الثاني II)), وبكسور وزنية مختلفة %((40,30,20,10 ودراسة تاثير اضافة مسحوق الحصى الناعم على الخواص الميكانيكية للبولي استر. استخدمت طربقة القولبة اليدوية في تحضير عينات المواد المتراكبة النانوية, وتم اجراء الاختبارات الميكانيكية وتم حساب متانة الصدمة ومتانة الصلادة لعينات المتراكبات النانوية. بينت النتائج لهذه الدراسة زيادة في قيمة متانة الصدمة مع زيادة نسبة الاضافة لمسحوق الحصى الناعم للعينات حيث بلغت اعلى قيمة لمتانة الصدمة (4.508 KJ/m2) للنوع I) ) و (5.509 KJ/m2) للنوع II)). في حين بينت النتائج لهذه الدراسة بان المتراكبات النانوية من النوع II)) امتلكت اعلى القيم لمتانة الصدمة مقارنة بمتراكبات نانوية من النوع I) ) عند نسبة الاضافة (40%). كذلك بينت النتائج زيادة في قيمة متانة الصلادة للعينات مع زيادة نسبة الاضافة لمسحوق الحصى الناعم من النوع I) ) حيث بلغت اقصى قيمة لها (91.65) عند نسبة الاضافة (40%) وبلغت اقصى قيمة لمتانة الصلادة(90.00) لعينات مسحوق الحصى الناعم من النوع (II) عند نسب الاضافة (10%, 20%) ER -