TY - JOUR ID - TI - Effect of Water on Some Mechanical Properties for Gravel Particles/Polyester Composites AU - Ahmed Jadah AU - Abbas Fadhil Essa AU - Ahmed Jadah PY - 2014 VL - 17 IS - 4 SP - 115 EP - 127 JO - Al-Nahrain Journal of Science مجلة النهرين للعلوم SN - 26635453 26635461 AB - In view of the developments of industrial applications, this happened in recent years and the need to use composite materials in general and polymer composite especially in the various industrial applications developed. This research deals with the study of the effect of water on some mechanical properties of polymer composite and its matrix material is unsaturated polyester (UPE) reinforced by gravel particles (different types) with particles size of (121.74 nm) for type (Ι) and (100.16 nm) for type (ΙI) as a fillers with different weight percentages (10, 20, 30, 40) % to prepare polyester composites. The molding method was used to prepare polyester and its composites sheets. The mechanical properties were studied including flexural strength and Young's modulus for the samples at normal conditions (N.C). unsaturated polyester and its composite samples were immersed in water for about 30 days to find the effect of water on their flexural strength and Young's modulus after immersion (A.I).The results showed that the samples of UPE / gravels particles type ΙΙ composite gained highest values of flexural strength (110.9MPa) as compared with other composites at (N.C) and showed that the samples of UPE / gravels particles type Ι composite gained highest values of Young's modulus (6.49 GPa) as compared with other composites at (N.C). Finally, The results showed decrease in values of Young's modulus for all the samples after immersion (A.I) as compared with the samples at (N.C) and showed decrease in values of flexural strength for all the samples except for the composite material of UPE / gravels particles type Ι at weight percent (10, 20) % which showed an increase in the value of flexural strength after immersion (A.I).

نظرا للتطورات في التطبيقات الصناعية التي حصلت في السنوات الأخيرة والحاجة الى استخدام المواد المتراكبة بشكل عام والمتراكبة البوليمرية بشكل خاص في مختلف التطبيقات الصناعية المتقدمة. تناول هذا البحث دراسة تاثير الماء على بعض الخصائص الميكانيكية لمادة متراكبة بوليمرية مادتها الاساس (بولي استر غير مشبع) مدعم بنوعين مختلفين من مسحوق الحصى بحجم حبيبي (121.74 nm) للنوع الاولI) ) و (100.16 nm) للنوع الثاني II))، وبكسور وزنية مختلفة %((40,30,20,10 لتحضير عينات البولي استر. استخدمت طريقة القولبة اليدوية في تحضير عينات البولي استر النقي، عينات متراكب البولي استر/ دقائق الحصى نوع Ι وعينات متراكب البولي استر/ دقائق الحصى نوع ΙΙ الخاصة لاختبار الثني عند الظروف الطبيعية وتم دراسة خواصها الميكانيكية التي تتضمن معامل يونك ومتانة الثني. كذلك تم غمر العينات في الماء لمدة (30 يوم) لمعرفة تأثير الماء على متانة الثني ومعامل يونك. بينت النتائج الخاصة بهذه الدراسة أن عينات متراكب البولي استر/ دقائق الحصى نوع ΙΙ اكتسبت اعلى قيمة في متانة الثني (MPa110.9) مقارنة مع العينات الاخرى عند الظروف الطبيعية كما تبيّن أن عينات متراكب البولي استر/ دقائق الحصى نوع Ι اكتسبت اعلى قيمة في معامل يونك (GPa 6.49) مقارنة مع العينات الاخرى عند الظروف الطبيعية. اخيراً، بينت النتائج تناقص في قيمة معامل يونك لجميع العينات بعد الغمر مقارنة مع العينات الاخرى عند الظروف الطبيعية كما وبينت النتائج تناقص في قيمة متانة الثني بعد الغمر لجميع العينات ما عدا عينات المتراكب المصنع من البولي استر مع دقائق الحصى نوع Ι الرطبة عند النسب الوزنية (10,20)% أمتلكت زيادة في قيمة متانة الثني. ER -