TY - JOUR ID - TI - Numerical Investigation of Intermittent weld Fillet in T – Section Structure – A Comparison with Continuous Weld التـحقيق العــددي لشريحـة اللحـام المتقطعـة لهيكــل على شكـل حرف T – دراسـة مقارنـة مع اللحـام المتصـل AU - Sameer Hashim Ameen سمير هاشم أمين PY - 2014 VL - 17 IS - 2 SP - 157 EP - 164 JO - Al-Nahrain Journal for Engineering Sciences مجلة النهرين للعلوم الهندسية SN - 25219154 25219162 AB - In current work, theoretical investigation of two perpendicular plates (joint by a double weld fillets) form a T – section structure made from plain carbon steel was carried out using AUTODESK INVENTOR PACKAGE. The intermittent weld in its two types (stagger and chain) was taken as fastening element in present work. The numerical results (stresses, deformations, and safety factors) were evaluated and compared with continuous weld results. The stagger weld, namely 80(20) arrangement, was being investigated as best arrangement among other arrangements which developed scientific reduction in shear stresses at yz- and xy-plane against chain weld by 15.78 % and 37.86 % respectively. The percentage reduction of safety factors according to Von – Misses stress of 80(20) chain and stagger intermittent welds are 29.78 % and 16.2 % in comparison with continuous weld respectively. The stagger intermittent weld 80(20) is gives lower stresses developed in welded section with higher safety factor.

في هذا البحث , تـم اجـراء الـتحليل الـنظري لـصفيحتين مـتعامدتـين ( مـوصولـة بـوصلـتي لـحام ) والـتي تـشكل هـيكل ذات مـقطع عـلى شـكل حـرف T مـصنوعـة مـن مـادة الـصلـب الـكاربونـي باسـتخـدام برنامـج AUTODESK INVENTOR. اخـذ في هـذا الـبحـث اللـحام المـتقطع بنوعـيتية (المتسلسل والـمتعاقب) كـوسـيلة ربـط. ان الـنتائـج الـعدديـة والمـتمثلـة بالاجـهادات والـتشوهـات ومـعامـلات الامـان تـم حـسابـها ومـقارنـتها بتلك الـمسـتـحصـلة مـن اللـحام المـتواصـل. يمـثل اللحـام الـمتعاقب ( وبالاخـص الـترتـيب 80(20)) اللحـام الانـسب مـا بين الـترتـيبات الاخـرى والـذي يـعطي انـخفاض مـلحـوظ في اجـهادات الـقص عـلى المـستويات yz و xy بـالمـقارنـة مع اللـحام المـتواصـل وبـقدار 15.78 % و 37.86 % عـلى الـتوالي. ان الانـخفاظ الـمئوي لـمعامل الامـان بالاعـتماد عـلى اجـهاد فـون – مـايـسز للـترتيب 80(20) وللـحام المـتقطع (المتسلسل والـمتعاقب) هو29.78% و 16.2% بـالمـقارنـة مع اللـحام المـتواصـل عـلى الـتوالي. يعطي اللحام المتعاقب 80(20) اقل اجهادات متولدة في مقطع اللحام مع اعلى معامل امان. ER -