@Article{, title={Effect of (50%Isopropanol – 30%Methanol – 17%Xylene) Mixture on Corrosion Behavior of Pure Al and its Alloys in Simulated Fuel تأثير خليط (50%Isopropanol – 30%Methanol – 17%Xylene) على السلوك التأكلي للالمنيوم النقي وسبائكه في الوقود الصناعي}, author={Rana A. Majed and Majid H. Abdulmajeed and Slafa I. Ibrahem and Saja A. Abdul Maged and Zahra`a S. Al-Saffar}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={32}, number={6 Part (A) Engineering}, pages={1380-1389}, year={2014}, abstract={This work involves studying the effect of adding (50%Isopropanol – 30%Methanol – 17%Xylene) mixture on corrosion behavior of pure Al and its alloys in simulated fuel at room temperature. The results of electrochemical measurements indicate that the addition of this mixture lead to decreasing in corrosion rate values for pure Al and its alloys. Electrochemical measurements were carried out by potentiostat at weep rate of 3 mV/sec to estimate the corrosion parameters using Tafel extrapolation method, in addition to cyclic polarization test to know the pitting susceptibility of materials in tested medium. Generally, the cathodic Tafel slope (bc) were increased after adding mixture. But the anodic Tafel slopes (ba) were decreased except for Al-Cu alloy. The small anodic slope indicates the presence of a film on the surface of the tested material, which is less permeable and can even obstruct the metal dissolution reaction but still permits an electrochemical reaction to occur. This behavior can be achieved by the electronic density on oxygen atoms in alcohols.

يتضمن هذا البحث دراسة تأثير اضافة خليط (50%Isopropanol–30%Methanol–17%Xylene) على السلوك التأكلي للالمنيوم النقي وسبائكه في الوقود المحضر مختبرياً عند درجة حرارة الغرفة، وتبين نتائج القياسات الكهروكيميائية بان اضافة هذا الخليط تؤدي الى تقليل معدل سرعة التأكل للالمنيوم النقي وسبائكه. اجريت القياسات الكهروكيميائية بالمجهاد الساكن عند معدل مسح 3ملي فولت لكل ثانية لتقدير متغيرات التأكل بطريقة تافل الاستقرائية بالاضافة الى اختبار المنحني الحلقي لمعرفة حساسية المادة للتنقر في الوسط المحضر. لوحظ عموماً بان ميول تافل الكاثودية ازدادت بعد اضافة الخليط وان ميول تافل الانودية قد قلت ما عدا لسبيكة المنيوم-نحاس. ان النقصان في ميل تافل الانودي يدل على وجود غشاء واقي على سطح المادة المعدنية والذي يكون اقل نفاذية ويعيق تفاعل الذوبان المعدني وتلعب الكثافة الالكترونية على ذرات الاوكسجين في الكحول دوراً كبيراً في تعزيز الغشاء الواقي.} }