@Article{, title={Application of Taguchi Approache to Study the Effect of Filler Type on Tribological Behavior of Polymer Composite Under Dry Conditions تطبيق طريقة تاكوشي لدراسة تاثير نوعية دقائق الحشو على سلوك الترايبولوجيا للراتنجات المقوى بالياف الزجاج تحت ظرف التشغيل الجاف}, author={Drai Ahmed Smait and Farag Mahel Mohammed and Hussam Lefta Alwan}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={32}, number={8 Part (A) Engineering}, pages={1916-1930}, year={2014}, abstract={The tribological behaviour of a G-P ( glass-polyester ) composite system and G-P composite systems interfaced with graded fillers were tested. The composite materials of G-P and G-P reinforced with SiC and Graphite particles as secondary fillers were experimentally investigated under varying loads, sliding velocities with dry surfaces by using a Pin-on-Disc test machine. A plan of experiments, based on the techniques of Taguchi, were performed to acquire data in a controlled way. An L9 Orthogonal array was selected for analysis of the data. Investigations to find the influence of additives, applied load, sliding speed on wear rate, wear resistance as well as the coefficient of friction during wearing process were carried out using ANOVA analysis and regression equation for each response. The model was chosen as "smaller is better" characteristics to analyse the dry sliding wear and friction while "larger is better" for sliding wear resistance. Results show that the additives have the highest influence followed by load and sliding speed. Finally, confirmation tests were performed to verify the experimental results foreseen from the mentioned correlations

سلوك الترايبولوجيا لمركبات البولي استر المقوى بالياف الزجاج من جهة ومركبات البولي استر المقوى بالياف الزجاج متداخله بحشو دقائق الكرافيت وكاربيدات السليكـون من جهــة اخرى قـــد تم اختبـارها عمليــا تحت تاثــيـــر احمـــــال وســرع انزلاقيه مختلفـــه وباستخدام جهــاز المسمار والقرص.التجارب تم تصميمها والتحكم فيـــــها اعتمادا على طريقـــة تاكوشي لـغرض الحصـــــول علـــى البياـنات البيانات بطريقة مسيطر عليها. المصفوفه القياسية L9 اختــيرت لتحليــــل البيانات.التحقـــــــق لايجـــاد تاثــــير المضـــافات والاحمـــال والســــــــرع الانزلاقية على معدل ومقاومة البليان وكذلك معامل الاحتكاك اثناء عمليــــــــــــــة التعريــــــه قــــــــد ـتم تحلـــيلهــــــــا باستخــــــــدام ANOVAمـميزات نموذج " الاصغر – الافضل" لتحليل البلـيان والاحتكاك بينما مـميزات نموذج "الاكبر- الافضل" لمقاومــــــة البلــــيان تـــم اختيارهما.اظهرت النتائج ان المضافات لها التاثير الاكبر يتبعها تاثير الاحمــــال والسرع الانزلاقيه واخيرا تم التحقـق من نتـائــج التجارب باستخدام المعادلات المستنبطة من نتائج التجارب الحاصله .} }