TY - JOUR ID - TI - Effect of Distance between Two Optical Single Mode Fibers on Minimum Splice Losses by Using Arc Fusion Splicer تأثير المسافة بين ليفين بصريين أحاديي النمط على خسائر الربط الدنيا بأستخدام ماكينة لحام القوس AU - Salah Aldeen Adnan Taha PY - 2014 VL - 32 IS - 8 Part (A) Engineering SP - 1982 EP - 1991 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - Old Researches were worked to find the splice losses between two single mode fibers (SMF-28/SMF-28) by using different arc fusion splicer without taking the effect of distance between them. We have conducted numerous experiments on this fiber where the fiber is cut and weld many times in order to find the fusion splice loss when the arc fusion power is fixed at (20 step) for different fusion times ( 1s , 3s , 6s , 9s ), the fusion time and fusion power were used with changing of the distance to (10um,20um,30um). another splice losses were achieved by using another arc fusion power ( 30 step,40 step,50 step ) by using the same arc fusion time and the distance between fibers as shown in fig's below , the minimum splice losses have been extracted from the different figures as below , these minimum splice losses compared with different arc fusion power and distance by using three-dimensional program ,Obviously when the distance between two fibers is increased(25-30)um, the minimum splice loss is decreased and vice versa when the distance is (10)um.

أجريت دراسات عديدة لايجاد الخسائر بين ليفين احاديي النمط (SMF-28/SMF-28) باستعمال مكائن لحام قوس مختلفة بدون اخذ بنظر الاعتبار تاثير المسافة بينهم0 لقد اجريت التجارب العديدة على هذا الليف الضوئي حيث تم لحام وقطع الليف عدة مرات لاستخراج خسائر اللحام عندما تكون قدرة اللحام ثابتة (20 step) ووقت اللحام متغير (9s, 6s, 3s, 1s) , قدرة اللحام ووقت اللحام تم استخدامهما عندما تتغير المسافة بين الليفين ( 10um , 20um , 30um ) على التوالي , وتم استخراج خسائر اللحام الاخرى بأستخدام قيم اخرى من قدرة اللحام الثابتة حيث تم استخدام (30 step , 40 step ,50 step ) وبأستخدام نفس اوقات اللحام والمسافات بين الليفين و كما مبين في الاشكال ادناه , وبعد ذالك تم استخراج اقل خسارة لحام من كل شكل وتمت مقارنة هذه الخسائر مع قدرة اللحام المختلفة والمسافات المختلفة بين الليفين بأستخدام شكل ثلاثي الابعاد وتبين بانه كلما زادت المسافة بين الليفين وبحدود معقولة um (30-25) تقل خسارة اللحام وكلما اقتربت المسافةum (10) بين الليفين زادت خسائر اللحام. ER -